Radiator Reservoir Tank Removal And Installation; Radiator Reservoir Tank Inspection; Water Hose Inspection - Suzuki kq750 Service Manual

Radiator Reservoir Tank Removal and
Installation
Removal
1) Remove the right inner fender. Refer to "Front Side
Exterior Parts Removal and Installation in Section
9D (Page 9D-6)".
2) Remove the reservoir tank mounting bolts.
3) Disconnect the hoses (1) and drain the engine
coolant.
4) Remove the reservoir tank (2).
1
Installation
Install radiator reservoir tank in the reverse order of
removal. Pay attention to the following points:
• Connect the radiator reservoir tank hoses securely.
Refer to "Water Hose Routing Diagram (Page 1F-3)".
• Fill the reservoir tank to the upper level.
B831G21606007
2
I831G1160019-02
F F
L L
I831G1160020-04
Engine Cooling System:

Radiator Reservoir Tank Inspection

Inspect the radiator reservoir tank cooling leaks. If any
defects are found, replace the radiator reservoir tank
with a new one.

Water Hose Inspection

Inspect the water hoses in the following procedures:
1) Remove the left side cover (1) and engine side cover
(2).
2) Check the water hoses for crack, damage or engine
coolant leakage. If any defects are found, replace
the radiator hose with a new one.
1F-8
B831G21606008
I831G1160021-01
B831G21606009
1
2
I831G1160064-02