CoolFreeze Safety instructions • Never touch uninsulated cables with bare hands. This applies especially to handling AC cables. Danger! • In installations in boats, if the devices are mains operated, it is important that the system is proteced by a fuse and an earth leakage protection device.
CoolFreeze Installation After unpacking the device check that no parts are missing. Place the cooling device in a dry place which is protected against splashing water. Do not place directly adjacent to sources of heat such as heating, gas ovens, hot-water, pipes or under the blazing sun.
Operation from the mains To operate from 220–240V AC mains, if not already included with your model please use one of the following WAECO optional accessory mains rectifiers: EPS- 816, EPS-817 or MPS-50. After the security device is active, parts of the equipment still may be under voltage.
CoolFreeze Defrosting Air humidity can deposit on the evaporator or in the interior of the cooling device as frost so that the refrigerating performaance is reduced. During removal of the ice never use hard or sharp tools which can cause damage to the plastics or the evaporator.
CoolFreeze Technical Data: Model CDF-35 CDF-45 Volume 31 litres 39 litres System Direct evaporator Cooling range +5ºC to -15ºC Weight 12.2 kg 13.7 kg Dimensions (WxHxD) 340 x 360 x 560 340 x 475 x 560 in mm Materials Injection moulded housing with integrated Rollbond...
Page 7
CoolFreeze World Headquarters WAECO International GmbH · Hollefeldstraße 63 · D-48282 Emsdetten phone: +49 2572 879-195 fax: +49 2572 879-322 e-mail: info@waeco.de Internet: www.waeco.de Europe Overseas + Middle East WAECO (Schweiz) AG WAECO Italcold SRL WAECO Pacific Pty. Ltd. Riedackerstrasse 7a Via dell’Industria 4/0...
Need help?
Do you have a question about the CoolFreeze CDF-35 and is the answer not in the manual?
Questions and answers