Setting The Bluetooth Connection (Bluetooth In); Setting The Usb Adapter (Kca-620M) To On/Off; Setting The Visual Soft Button; Setting The Digital Output - Alpine IVA-W205R Owner's Manual

Setting the Bluetooth Connection
(BLUETOOTH IN)
Setting item: BLUETOOTH IN
Setting contents: NAV. (IVA-W205R only) / ADAPTER / OFF
NAV.: Select when the optional portable navigation is
connected.
(IVA-W205R only)
The TEL screen of the portable navigation is
displayed.
ADAPTER: Select when the optional Bluetooth box is
connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
OFF: Select to ignore any external interrupts.
• The setting cannot be made when "Setting the External Device
Interrupt Mode" (page 35) is set to ON.
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.
Setting the USB Adapter (KCA-620M) to
ON/OFF
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.

Setting the VISUAL Soft Button

Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
VISUAL: Recalls the VISUAL Select screen by touching
[VISUAL].
NAV.: Switches directly to the navigation screen by touching
[VISUAL].

Setting the Digital Output

To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.

Subwoofer On and Off

Setting item: SUBWOOFER
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Autogood products internet store http://130.com.ua

DISPLAY Setup

Display Setup Operation

The Parking Brake must be engaged to access the DISPLAY
mode screen. Attempting to access this screen while driving
will display the warning-CAN'T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
"Setting item" of DISPLAY Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [DISPLAY].
The DISPLAY SETUP screen appears.
3
Touch [ ], [ ] or [
change its setting.
Setting items:
TILT* / VISUAL EQ / DIMMER / DIMMER LOW LEVEL /
BACKGROUND / AUTO BACKGROUND / DATA DOWNLOAD /
BASE COLOR / PULSETOUCH / SCREEN ALIGNMENT
* IVA-W202R only:
For operation, refer to "Adjusting the Monitor Viewing Angle" on
page 10.
4
Touch [RETURN] to return to the previous screen.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
], etc., of the desired item to
37
-EN