Bluetooth Module - HP Pavilion dm1 Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the Bluetooth module:
1. Position the computer right-side up, with the front toward you and the display open as far as
possible.
2. Disconnect the Bluetooth cable (1) from the system board.
3. Lift the Bluetooth module (2) straight up from the speaker bar.
Reverse this procedure to install the Bluetooth module.
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Top cover on page 50).
Spare part number
537921-001
38).
Component replacement procedures 55