Mjpeg Streaming; Using Rtsp With Vlc - Aviosys 9070-IRW User Manual

MJPEG Streaming

This command allows you to integrate streaming data into a software, website, or any other application.
http://ipaddress:port/ipcam/mjpeg.cgi
Ex. http command
http://192.168.1.192/ipcam/mjpeg.cgi

8.) Using RTSP with VLC

Before Setting up VLC: Make sure that the 9070-IRW is set to be the DMZ host on the router that you are
using, please refer to the routers manual on how to accomplish this.
How to setup VLC media player & Open a network stream
Real Time Streaming Protocol (RTSP) gives the device another way to stream live video. Using programs
that support RTSP, you can broadcast the videos from the 9070 live.
Note: To access the device from outside the network. Please make sure of the following:
9070 should be set to DMZ host,
or mapping router's TCP ports 554 and 8554 to 9070, preferably at the same time mapping UDP port
6970-9999
1.) Open VLC media Player
2.) Click on Tools > Preference
3.) On the bottom of the screen click the Reset preference button.
4.) On the bottom left hand side of VLC select the all under the show settings area.
5.) Then in the left panel select Input / Codecs > Demuxers > RTP/RTSPl and type in the RTSP user
name and RTSP password.
- 59-
Ref#90020326K0709