Table of Contents
Advertisement
Digital Multiplexer
When desiring to see in the FULL screen
The FULL screen may be seen in the live and tape replay mode, available for 9 channels from No.1
through No.9.
Method to use.
The camera select button does not operate in the following cases:
When desiring to see in the division screen
The division screen may be seen in the live replay mode and triplex mode and the division mode of
2, 4, 7, 9 exists as a screen select mode.
The only division mode of 2, 4, 9 is available in the triplex mode.
Method to use
Press the "multi screen" button wants until reaching the desired division indication mode.
Channel resetting method
1) Press the "SET" button. In this case the SET LED turns on and the BORDER LINE on the left upper
2) Move the section whose border blinks to a desired position using the move button.
3) Press the "CAMERA SELECT" button equivalent to the desired channel at the position.
4) Repeat operation in 2), 3) until setting is completed.
5) Press the "SET" button after completing setting.
The previously indicated division indication mode is returned if selecting the division screen using the
"MULTI SCREEN" button on the full screen.
"MULTI SCREEN" button does not operate in the following cases:
Press the camera select button of the desired channel.
- In setting of program mode
- In displaying ALARM/LOSS LIST on screen
- In setting FREEZE in the division screen
- In resetting of channel in the division screen
of screen blinks.
- In setting division screen
- In setting of program mode
- In displaying ALARM LIST on screen
- During zoom operation
4-2
Advertisement
Table of Contents
