Specification - Rinnai Neo RIB2310N Installation Manual

Specification

Description
Installation
Combustion Method
Data Plate
Flue - Masonry
Flue - Decorative
(mock chimney) and
Freestanding
Gas Connection
Gas Type
Convection Fan
Heating Area
Ignition
Input/Output
Noise Level
Power Consumption
Safety Devices
Temperature Control
Thermal Efficiency
Weight
Rinnai New Zealand Limited
• Inbuilt gas space heater
• Burning log effect
• Glass front with glass dress guard
• Convection fan, top air discharge
Inbuilt masonry, inbuilt mock chimney, and freestanding options
Bunsen type burner
Inside appliance on the front left hand side
Rinnai strongly recommends the use of a Rinnai flexiliner flue system (flexi Ø 100 mm).
Failure to meet this criteria may result in an unsafe situation.
Installation without a flexiliner flue is permissible as long as the chimney is checked for
soundness and ability to achieve a good draw. Terminal 240 mm x 45 mm rear discharge
(spigot).
Natural draft twin skin flue. An approved 100 mm cowl must be fitted to all installations.
Decorative chimney installations require a Rinnai zero clearance box and zero clearance
flue kit.
Flue dimensions:
• Outer - 150 mm
• Inner - 100 mm
½ " BSPT, the gas supply terminates inside the heater at the front lower right hand side
of the appliance
NG and General Product LPG
2-speed centrifugal, double diameter 160 x 180 mm
• Up to 107 m (NG)
2
• Up to 93 m (ULPG)
2
Continuous spark electronic ignition
Input NG: 14-30 MJ/h
Input ULPG: 14-27 MJ/h
37-45 dB(A)
High 50 W
Standby <3 W
1500 mm cord is supplied with 3-pin plug on the rear left of the appliance
Overheat switch, electrical fuse, flame failure sensing system, and power failure
protection
Manual models, manual control on unit
ETR models, thermostatic, temperature control range 7-32 °C
NG - 80.5%
ULPG - 80%
Efficiency star rating: 4.10 stars
60 kg
Output NG: 3.24-6.94 kW
Output ULPG: 2.98-6.04 kW
4
Neo Installation Manual: 11906-B
02-11