Mounting Precautions - Sharp PN-K322B Setup Manual

• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• To install on a stand (commercially available) or on a wall,
or to remove or move the monitor, consult your dealer.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this work
yourself. Our company will bear no responsibility for accidents
or injuries caused by improper mounting or mishandling.
• Use the monitor with the surface perpendicular to a level
surface.If you are tilting the monitor without using the
supplied stand, the monitor may be tilted up to 25 degrees
upward or 20 degrees downward.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
For the monitor in landscape orientation
2
[5]
For the monitor in portrait orientation
7-7/8 [20]
2
[5]
For the monitor on the supplied stand
2
[5]
• If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 41°F (5°C) to 95°F (35°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
4
E

MOUNTING PRECAUTIONS

Unit: inch [cm]
7-7/8 [20]
2
[5]
2 [5]
Unit: inch [cm]
2
[5]
2 [5]
Unit: inch [cm]
27-19/64 2
[69.3] [5]
• When installing the monitor
in landscape orientation,
you can attach the
supplied horizontal sticker
(Operation buttons) to the
front.
• Use the supplied vertical sticker when you install the
monitor in portrait orientation.
Attach the vertical sticker (Operation buttons) to
the back or the front.
• Back
• Front
1/8 [3.5]
1/8 [3.5]
Caution
• Adhere to the following when installing the monitor in its
portrait orientation. Failing to adhere to the following may
cause malfunctions.
- Install the monitor such that the operation buttons are
located on the top side.
- Set the MONITOR on the MONITOR menu to PORTRAIT.
(See OPERATION MANUAL.)
Vertical sticker (Operation buttons)
Vertical sticker (Blank)
Vertical sticker (Operation buttons)
Cover
Sharp logo
Vertical sticker (Logo)
Horizontal sticker
(Operation
buttons)