8
Get started
1
Remove the back cover.
2
Make sure the contact area of the memory card is facing down, and insert the card.
Push the card in, until it locks into place.
3
Replace the back cover.
Remove the memory card
Important: Do not remove the memory card when an application is using it. Doing
so may damage the memory card and the device and corrupt data stored on the card.
You can remove or replace the memory card without switching the phone off.
1
Remove the back cover.
2
Push the card in, until it is released, and pull the card out.
3
Replace the back cover.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it
before you can switch on your phone for the first time.
If the phone indicates a low charge, do the following:
1
Connect the charger to a wall outlet.
Need help?
Do you have a question about the C2-05 and is the answer not in the manual?
Questions and answers