Reset Paired Devices List - VXI VoxStar User Manual

RESET PAIRED DEVICES LIST

The headset must be on to perform this function.
To reset the headset's internal paired devices list, hold the headset near your ear. Press and hold the
Volume Up and the Volume Down buttons simultaneously for approximately 6-10 seconds until two
low tones are heard.
This procedure may be necessary if the headset will not pair or connect to a device.
NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will need
to be paired to the device after reset has occurred. If Multipoint Mode was enabled at the time of reset,
the headset will remain in Multipoint Mode.
™
VXi VoxStar User Guide PAGE 19