Selecting The Input Signal - Panasonic TH-80LFB70U Operating Instructions Manual

Selecting the input signal

Press to select the input signal to be played back from the equipment which has been
connected to the Display.
Alternatively you can press
INPUT
HDMI1
HDMI2
SLOT INPUT
VIDEO
COMPONENT
PC
DVI
DIGITAL LINK
Miracast(TM)
Panasonic APPLICATION
MEMORY VIEWER
WHITEBOARD
*1 "SLOT INPUT" appears when an optional Terminal Board is connected.
When a Terminal Board with dual input terminals is connected, "SLOT INPUT A" and "SLOT INPUT B" will appear.
When a Terminal Board incompatible with the Display is installed, "Non-Compatible Function Board" is displayed.
*2 "COMPONENT" may be displayed as "RGB" depending on the setting of "Component/RGB-in select".
(see page 68)
*3 The WHITEBOARD input can be selected when "Touch Screen" of "Touch Screen Settings" is "On".
Notes:
• Selecting is also possible by pressing the INPUT button
on the unit.
• Outputs the sound as set in "Audio input select" in the
Options menu. (see page 77)
• Select to match the signals from the source connected
to the component/RGB input terminals. (see page 68)
• Image retention (image lag) may occur on the LCD
display panel when a still picture is kept on the panel for
an extended period. To prevent such a problem, using
the screensaver is recommended. (see page 61)
• The connection of the Wireless Manager is interrupted if
the input is switched from Panasonic APPLICATION to
Miracast(TM) or MEMORY VIEWER.
The connection of Miracast is interrupted if the input is
switched from Miracast(TM) to Panasonic APPLICATION
or MEMORY VIEWER.
Please check the setting again after switching the input.
20
, press
HDMI input in HDMI 1 terminal
HDMI input in HDMI 2 terminal
Input signal in a Terminal Board*
Composite video input in VIDEO terminal
Component/RGB input in COMPONENT/RGB IN terminal*
Computer's signal input in PC IN terminal
DVI-D input in DVI-D IN terminal
DIGITAL LINK input in DIGITAL LINK terminal
Select this input when using the Miracast function. (
Select this input when using "Wireless Manager" via wired/wireless LAN.
Select this input when using the Memory Viewer function. (
The screen switches WHITEBORAD input*
( page 37)
see
to select the input and press
1
see
3 .
.
2
page 45)
page 32)
see
ENTER/
+
/
VOL
-
/
MENU
INPUT