Login Procedure - Comtrend Corporation CT-5072T User Manual

3.3 Login Procedure

Perform the following steps to login to the web user interface.
NOTE: The default settings can be found in
STEP 1: Start the Internet browser and enter the default IP address for the device
in the Web address field. For example, if the default IP address is
192.168.1.1, type
NOTE: For local administration (i.e. LAN access), the PC running the browser
must be attached to the Ethernet, and not necessarily to the device.
For remote access (i.e. WAN), use the IP address shown on the
Information
STEP 2: A dialog box will appear, such as the one below. Enter the default
username and password, as defined in
Click OK to continue.
NOTE: The login password can be changed later (see
STEP 3: After successfully logging in for the first time, you will reach this screen.
NOTES: If a PVC connection already exists then this Quick Setup screen will be
bypassed and the
selections available on the main menu (onscreen at left) are based upon
the configured connection(s) and user account privileges.
http://192.168.1.1.
screen and login with remote username and password.
Device Information
10
section 3.1.
section 3.1 Default
section 8.6.3)
screen will display instead. The
Device
Settings.