Do you have a question about the 32 and is the answer not in the manual?
Questions and answers
Summary of Contents for Mirage Vision 32
Page 1
Weatherproof Outdoor LCD Outdoor TV (with Digital Wireless Signal Transmission) Models 32/27 ’ ’ REF. 41/06...
Page 2
Congratulations on your purchase of the MirageVision LCD TV. This product is designed to be permanently ™ installed outdoors. To ensure safety and minimize mechanical problems, please read in detail before using or installing this product. All operating instructions must be read and understood before the product is operated. This manual should be kept in a safe place for future reference.
Page 3
Do not open the outer cabinet, as the internal parts and components could carry “High Voltage” and you may become seriously injured if you touch them. Warranty will not be honored if the user opens the unit and services the product. Avoid touching the front screen, as skin oils are sometimes difficult to remove.
Page 4
INSTALLATION AND OPERATION OF THE MIRAGEVISION LCD OUTDOOR TV COMPONENTS WITHIN THE BOX: LCD TV Unit One TV Unit External AC/DC Power Pack with AC Plug One Digital Wireless Video/Signal Transmitter (DWT) with AC/DC Power Pack Two Receiver Signal Antennas One Hand Remote Control (two batteries included) One IR Wire MOUNTING YOUR OUTDOOR LCD TV:...
Page 5
“Audio In” located on the back of the DWT. This will send the audio signal from your Source to the DWT. NOTE: RCA audio cables and the S-Video cable are provided with the 27 and 32 inch units. These cables come in different lengths, as you might need longer ones, depending upon how far away you mount your DWT from your source.
Page 6
Once your connections are correct, push the Power Button, located in the back of your DWT to the “IN” position. This will power up the DWT unit. CAUTION: Make sure all connections are correct before turning on the DWT. If all connections and settings are correct, you should now have a picture on your LCD TV screen. INSTALLING SOURCE “IR”...
TROUBLE SHOOTING: For the best outdoor picture quality, set the TV in a shaded area, avoiding direct sunlight on the screen, as direct UV rays can deteriorate picture quality. The MirageVision Outdoor TV uses proprietary Anti-UV protection circuitry, keeping the LCD panel from direct sunlight/UV damage. To protect the liquid crystals from damage, the TV’s LCD screen will turn to “black”...
Page 8
DVD player. Plug in the DVD player into an AC 110 outlet and power up the DVD. Install the DVD into the player and push Play on the DVD. Turn on the DWT Power Button (push on - the button will be in the IN position). The picture should be transmitted onto the Outdoor LCD TV.
Additional Function Buttons: Located on the right side of the LCD TV Cabinet is a set of water-proof buttons. The functions are labeled and they can be used instead of using the Hand-Held Remote.
Hand-Held Remote Control: Power Button - This button is orange in color and is used to power ON the LCD TV. Display Button - Push for on screen display. Mute Button - Push to mute the sound…Push again to un-mute sound. MTS Button - No Function CHRTN Button -...
LIMITED WARRANTY 2 YEAR PART/1 YEAR LABOR Conditions of MirgeVision Limited Warranty: The MirageVision Outdoor LCD TV is warranted to be free of defects and workmanship from the time of purchase by the original owner. If this product is found and proved to be defective, MirageVision will repair or replace defective parts at no charge for the parts and labor to the original owner, subject to the terms and conditions of this Limited Warranty.
MirageVision and its representatives or agents shall in no event be liable for any general, indirect or consequential damages arising out of/or caused by the use of/or the inability to use this product. This warranty is made in lieu of all other warranties, expressed or implied, and all other liabilities on the part of MirageVision.
Need help?
Do you have a question about the 32 and is the answer not in the manual?
Questions and answers