Points In Head Height Adjustment - MIMAKI Tx2-1600 Operation Manual

10. Press the [ENTER] key.
The carriage will come back to the capping station.
The LCD shown on the right is displayed.

Points in head height adjustment

• When the head height is so adjusted that the tip of the head height adjust-
ment rod just makes contact with the surface of the fabric, the distance be-
tween the head and the printing surface of the fabric becomes optimum.
• As long as the head height is so adjusted that the tip of the head height
adjustment rod just makes contact with the surface of the fabric, the distance
between the head and the printing surface of the fabric remains unchanged
even when the head is raised.
• To avoid fluffing of the fabric surface, warp of the fabric edge, or waving of
the fabric during printing, the distance between the head and the printing
surface of the fabric can be increased.
• When the distance between the head and the printing surface of the fabric is
increased, the print quality deteriorates.
Optimum distance
Tip of the head
height adjustment rod
Distance increased
When a fabric having fluffy surface, warp, or irregular surface is used
Tip of the head
height adjustment rod
• When the head height is adjusted, the printing points shift in position. After
head height adjustment, be sure to correct the dot positions. (See page 4.6)
Fabric
Fabric
- 1.39 -
I N I T I A L I Z I N G
P L E A S E W A I T
M e d i a
N o M e d i a