DeWalt DW331-XE Instruction Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Power Tool
  5. DW331-XE
  6. Instruction manual
DeWalt DW331-XE Instruction Manual

DeWalt DW331-XE Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
DW331-XE
JIGSAW

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DW331-XE

Summary of Contents for DeWalt DW331-XE

  • Page 1 INSTRUCTION MANUAL DW331-XE JIGSAW...

  • Page 3: Safety Instructions For Power Tools

    It may be used for a preliminary assessment of exposure. WARNING: The declared vibration emission level represents the main applications DW331-XE of the tool. However if the tool is used for different applications, with different Voltage accessories or poorly maintained, the vibration emission may differ.
  • Page 4 e) When operating a power tool outdoors, use an extension cord suitable WARNING: To reduce the risk of injury, read the instruction manual. for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual GENERAL POWER TOOL SAFETY WARNINGS current device (RCD) protected supply.
  • Page 5 b) Do not use the power tool if the switch does not turn it on and off. Any – This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and power tool that cannot be controlled with the switch is dangerous and must knowledge, unless they have been given supervision or instruction concerning be repaired.

  • Page 6: Components (Fig. 1)

    • Do not operate this tool for long periods of time. Vibration caused by the WARNING: Always wear proper personal hearing protection that conforms to operating action of this tool may cause permanent injury to fingers, hands, and AS/NZS1270 during use. Under some conditions and duration of use, noise from this arms.

  • Page 7: Assembly And Adjustments

    4. To remove the saw blade, fully retract the blade latch and pull the blade out of the FIG. 1 holder. FIG. 2 INTENDED USE Your jigsaw DW331-XE has been designed for professional cutting of wood, steel, aluminium, plastic and ceramic material. SAW BLADES ASSEMBLY AND ADJUSTMENTS BLADE TYPE...
  • Page 8 Setting the Bevel Angle (Fig. 3) Position Wood Metal Plastics The adjustable shoe (I) allows cutting of LH and RH bevel angles up to 45˚. The bevel Plywood Aluminium – scale has preset positions at 0˚, 15˚, 30˚ and 45˚. 1.
  • Page 9 FIG. 6 TO MOUNT THE INSERT INTO THE SHOE 1. Slide the edges (N) into the grooves (O) of the shoe (I). 2. Slide the insert back into position against the shoe. TO MOUNT THE INSERT INTO THE COVER 1. Slide the edges (N) behind the ribs (P) of the cover (L). 2.

  • Page 10: Operation

    • Never run your tool without a saw blade. WARNING: After using the tool for an extended period on low speed settings, run it • For optimal results, move the tool smoothly and constantly over the workpiece. for approximately 3 minutes on maximum no-load speed. Do not exert lateral pressure on the saw blade.

  • Page 11: Maintenance

    Repairs WARNING: Use a cooling lubricant (cutting oil) to prevent overheating of the saw blade or the workpiece. To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by certified Optional Accessories service centers or other qualified service organizations, always using identical Consult your dealer for further information on the appropriate accessories.
  • Page 12 • www.dewalt.co.nz (FEB12) Part No. N169862 DW331-XE Copyright © 2009, 2012 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip;...

Table of Contents