Dynaudio Xeo Hub Owner's Manual
Hide thumbs
Also See for Xeo Hub:
- Owner's manual (116 pages) ,
- Owner's manual (32 pages) ,
- User manual (38 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dynaudio Xeo Hub
Summary of Contents for Dynaudio Xeo Hub
- Page 1 Owner’s Manual Xeo English...
- Page 2 All Sonos products are trademarks of Sonos Inc. Logitech Squeezebox is a trademark of Logitech Inc. An update to this manual may be necessary due to product improvements and new functions. The latest version of this manual can be found on the Dynaudio website at www.dynaudio.com/xeo Dynaudio...
-
Page 3: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 4 RISK OF ELECTRIC SHOCK! DO NOT OPEN! To reduce the risk of electric shock, do not remove the back panel and do not expose the apparatus to rain or moisture. No user serviceable parts inside. Refer servicing to qualified personnel. Never open the loudspeaker housing. Dynaudio...
-
Page 5: Table Of Contents
Safety information Xeo loudspeakers Connections and control elements Xeo loudspeakers Division into audio zones Power supply unit for Xeo Hub, Extender, and Link Cloth cover Scope of delivery Setting up Xeo loudspeakers (Xeo 4 or Xeo 6) Connecting and adjusting... -
Page 6: Thank You
Thank you for choosing Dynaudio Xeo. Xeo combines the latest wireless technology with impressive sound quality and makes listening to music truly comfortable and easy. The next few pages contain important information on connecting the system and its operation to ensure perfect function and the best-possible sound quality. -
Page 7: Safety Information
Never open the loudspeaker housing. ► Do not operate defective loudspeakers and disconnect defective loudspeakers from the mains voltage. Please contact your Dynaudio Xeo distributor if you have any problems. Distributor addresses can be found in the Internet at www.dynaudio.com. ►... -
Page 8: Scope Of Delivery
2 Xeo loudspeakers (Xeo 4 or Xeo 6) 2 Xeo loudspeaker cloth covers 1 Xeo remote control 2 Xeo loudspeaker power cables (country-specific version) 1 Xeo first time setup manual (quick guide for installation, not shown) Dynaudio... -
Page 9: Xeo Hub
1 stereo analog cable (RCA – RCA) 1 optical digital cable (Toslink – Toslink) 1 USB cable (USB – mini USB) 1 Xeo first time setup manual (quick guide for installation, not shown) ... -
Page 10: Xeo Extender
Xeo Extender 1 Xeo Extender 1 Xeo power supply unit with micro USB cable (country-specific version) 1 Xeo first time setup manual (quick guide for installation, not shown) Xeo Link 1 Xeo Link 1 Xeo power supply unit with micro USB cable (country-specific version) ... -
Page 11: Unpacking
Transport damage may be expected if the packaging is already severely harmed. Do not attempt to commission a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio Xeo distributor. Distributor addresses can be found in the Internet at www. dynaudio.com. -
Page 12: The Xeo System
Xeo consists of several high-quality components that are optimally matched. When combined, they can fulfill the most demanding requirements for a wireless multi-room and multi-source system. This manual describes all of the available Xeo components. It is possible that only a few of the NOTE: descriptions are relevant to you, depending on your system configuration. -
Page 13: Combination Examples
Combination examples Below you will find several examples of Xeo component combinations. The high level of flexibility in the Xeo system enables even more variants. Ask your Dynaudio distributor to find the perfect solution for your needs. Standard: Hub + loudspeaker... -
Page 14: Remote Control
Internet at www.dynaudio.com. Remote control The Xeo remote control can be used to turn the loudspeakers on and off, change the volume, and select a Hub and its connected signal sources. If the loudspeakers are being operated in stereo mode (right/left), commands will always apply to both of the loudspeakers. -
Page 15: Display Elements
Display elements Connection status LED illuminated in Connection established (to a loudspeaker, Extender, or blue: Link). LED flashes: The Hub is searching for a connection. LED illuminated in red: The Hub could not establish a connection. Inputs Aux in Input for cable with stereo jack (3.5 mm stereo) Connect devices here that have an output for the stereo jack. -
Page 16: Other Connections And Control Elements
► Connect the Hub to the mains voltage using the POWER connection and the Xeo power supply unit. Do not use a different power supply unit! Note: If you connect the Xeo Hub via a USB cable to a computer (that is switched on), you do not need an additional mains connection. - Page 17 Your signal source Signal source Xeo Hub Cable Notes output input (source – Hub) Astell&Kern Headphones 1: Aux in Jack 3.5 mm – 3.5 mm – Optical 2: Optical In Toslink – Toslink PonoPlayer Jack 1: Aux in Jack 3.5 mm – 3.5 mm –...
-
Page 18: Xeo Loudspeakers
Xeo loudspeakers The active Xeo 4 and Xeo 6 loudspeakers have an integrated amplifier and can be controlled with the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a switch on the rear. Connections and control elements... -
Page 19: Division Into Audio Zones
Division into audio zones The Xeo loudspeakers (as well as Xeo Link) can be assigned to an audio zone using the Zone selector switch. All components assigned to a zone can be operated together via the remote control. Green Green... -
Page 20: Cloth Cover
CAUTION Spikes with pointed ends Xeo 6 floor-standing speakers are delivered with spikes for permanent installation on the floor. The pointed ends of the spikes may result in injuries and damage delicate floors. ► Pay attention that you do not injure yourself with the spikes. -
Page 21: Switching On/Standby Mode
Switching on/standby mode To switch the loudspeaker on from standby mode: ► Point the remote control at the loudspeaker and press the ON button or press on the interface display. ▼ The loudspeaker will automatically search for an active Hub and an audio signal. If found, the signal will be output (autoplay function). -
Page 22: Interface Display
The loudspeaker is in standby mode. Hub connection LED is flashing in red. There is no active Hub or no connection to a Hub possible. Switch-on process LEDs are illuminated one by one. The loudspeaker is being switched on. Dynaudio... - Page 23 Switch-off process The LEDs go out one by one. The loudspeaker is being switched off. In the final state, only one LED is illuminated dimly in red. Select a Hub One of the three LEDs flashes. LED 1 = Hub A LED 2 = Hub B LED 3 = Hub C Select an input...
-
Page 24: Xeo Extender
Xeo Extender The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo loudspeakers or other Xeo components can be operated further away from the Hub. Connections and control elements Front Left LED Reception status LED illuminated in There is a connection to a Hub. -
Page 25: Connecting And Establishing A Link
Connecting and establishing a link Extender 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select the same ID on the Hub and Extender for the Hub Id In. -
Page 26: Xeo Link
As a result, you can also connect active subwoofers, active loudspeakers, or other components to the Xeo system. Xeo Link can also be connected with a 1st generation Xeo transmitter. This lets you operate both Xeo systems together. -
Page 27: Connecting And Establishing A Link
Dynaudio Sub 600. 3. Select the desired signal source with the remote control and control the volume. You can assign the Xeo Link to an audio zone the same way as with the Xeo 4 and Xeo 6 NOTES: loudspeakers and then control it specifically via the remote control. -
Page 28: Malfunctions
TVs, and radios, as well as water pipes and air shafts. These can divert radio signals. This is why you should test different locations for the Xeo Hub, Extender, and Link and favor the most direct radio path between the Xeo components. -
Page 29: Technical Data
Technical data Loudspeakers Xeo 4 Xeo 6 Frequency range (± 3 dB) 45 Hz – 23 kHz 31 Hz – 23 kHz Power consumption during operation 5 – 38 W 7.4 – 77 W Power consumption in standby 0.34 W (with active network) 0.35 W (with active network) -
Page 30: Reminding
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Dynaudio... -
Page 31: Ic Notice
IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. - Page 32 Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 4108 - 41 80 - 0 www.dynaudio.com © Dynaudio International GmbH, Xeo Owner’s Manual 0714 Item No. 4552612. All text and image copyrights reserved. Subject to change without notice.
Need help?
Do you have a question about the Xeo Hub and is the answer not in the manual?
Questions and answers