Power Sources For Your Nec Versa; Using The Ac Adapter - NEC VERSA LX Service And Reference Manual

Power Sources for Your NEC Versa

The NEC Versa can be powered using three different sources, making it a truly
portable system. Operate your NEC Versa just about anywhere using one of the
following power sources:
T
the AC adapter connected to an electrical wall outlet (using AC power).
T
the battery pack or an optional second battery pack.
T
the optional Auto adapter.
Read the following sections for specific steps on powering on the system with
these power sources.

Using the AC Adapter

Use the AC adapter and power cable that came with your NEC Versa to run
your computer on alternating current (AC) power, or to recharge the battery
pack. Use the AC adapter whenever a wall outlet is nearby.
Keep the adapter connected whenever possible. The AC adapter charges the
battery whether or not you are using the NEC Versa or have the system powered
on.
Do not attempt to disassemble the AC adapter. The AC
adapter has no user-replaceable or serviceable parts inside.
Dangerous voltage in the AC adapter can cause serious
personal injury or death. The AC adapter is intended for use
with a computer. Both must meet EN609050 standards.
2-2 System Configuration and Setup
!
WARNING