Page 1
DSR9400 FTA, EM VIA êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË DSR9400 FTA, EM VIA êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË..RUS Instructions for use ....... GB MF68-00284A REV. 1.0 èêàÖåçàä ëèìíçàäéÇéÉé íÖãÖÇàÑÖçàü èêàÖåçàä ëèìíçàäéÇéÉé íÖãÖÇàÑÖçàü...
Page 2
êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË..RUS Instructions for use ....... GB DSR9400 FTA, EM VIA...
Page 3
DSR9400 FTA, EM VIA êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË èêàÖåçàä ëèìíçàäéÇéÉé íÖãÖÇàÑÖçàü...
SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY AC 176~264V 50/60Hz OVERLOADING Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS Keep liquids away from the STB.
SCART connector marked TV to the respective SCART port on the TV. 4. CONNECTING YOUR VCR To connect a VCR, the DSR9400 has been provided with SCART/RCA at the rear marked "VCR". Using a SCART/RCA connector, the VCR can be connected to the receiver.
DESCRIPTION DESCRIPTION Front Panel Rear Panel 1. LED Display When the LED light Red, the set-top box enters the standby mode. When the LED light Green, it enters the operation mode. 2. Card Slot 1 Slot for Viaccess smartcard. 1. AC MAINS This is to plug in the AC mains power cord.
DESCRIPTION DESCRIPTION 5. MUTE This key is used to toggle between normal & muted audio. Remote Control Unit 6. FAV Use the key to switch between favorite lists. 7. EPG Electronic Program Guide button displays the TV/Radio Program guide. 8. LAST This key is used to call up directly whatever channel you were watching list.
BASIC FUNCTION BASIC FUNCTIONS 3. Select Soundtrack 1. Display Screen Press Yellow ( ) key to see Before you can view the television program, you must perform the installation. the soundtrack list. Therefore you will see only menu images at first. Press key to select one.
Page 28
BASIC FUNCTION BASIC FUNCTIONS 5.1 Service Favorites 6. Program Information Press the Green ( ) key on the control unit to EPG-Electronic Program Guide select the Favorites list. The electronic program guide gives you a channel list for the channels. Use the keys to select a favorite group that you want.
OPERATING THE RECEIVER 8. Teletext OSD Main Menu When the current broadcasting program provides After installing your antenna system and DSR9400 with appropriate connectors. Teletext OSD, press the Green ( ) key twice to see the current Teletext OSD list.
OPERATING THE RECEIVER OPERATING THE RECEIVER 1.1 LNB Setting Select from Menu Mode: "User" mode : Enables control of basic positioner function You can select the satellite and LNB setting conditions recommended for beginners. General user uses “User” mode. to execute channel search and you can alter the settings for 22KHz tone.
Use the keys to move each filed. To tune-in new channels and weak signals, the DSR9400 has been provided with the option "Manual Scanning" where the channel data can be entered by the user. After selecting the "5. Manual Scanning" from the Installation Menu, the following screen will be displayed: Select the target satellite for manual search.
OPERATING THE RECEIVER OPERATING THE RECEIVER Select the FEC(Forward Error Correction)of the transponder 2. Channel Organising you want to find. You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto. The "Channel Organising" menu has seven Select the polarization of the transponder you want to find. functions: (Horizontal/Vertical/Circular Left/Circular Right) The "Channel Organising"...
OPERATING THE RECEIVER OPERATING THE RECEIVER 2.3 Delete Channel 2.7 Move & Edit Channel Select the desired channel you want to delete by Select the desired list with keys. pressing Red ( ) key. Select channel by pressing Red ( ) key.
To change the PIN code, select the second option "Change PIN Code". This "Parental Lock" feature sets viewing restrictions and prevents unauthorized access to your DSR9400 This will take you to the following menu: through the PIN (Personal Identification Number), In this option, you need to enter the current PIN which is a 4 digit number.
OPERATING THE RECEIVER OPERATING THE RECEIVER 4. System Setup 4.3 Media Settings You can set the various media settings you want. This option enables you to change the factory preset Place the cursor on this sub menu and press system settings as per your requirements. Select the TV system : PAL, SECAM.
OPERATING THE RECEIVER OPERATING THE RECEIVER 4.5 System Information 5. Embedded Viacces If you have to contact your service provider or a service 1. Change PIN code: center they might ask for information available from this Change the PIN code of the Smartcard, menu.
TROUBLESHOOTING TECHNICAL SPECIFICATIONS 1. User section Problem Possible cause Solution of the problem 4000 programmable channels, auto and manual scan facility, software download via satellite & PC, channel organizing (programmable), No display LED on Power cord Power cord plug in correctly the front panel;...
Page 38
TECHNICAL SPECIFICATIONS NETWORK INTERFACE (Broadcasting - Digital) BASE-BAND AUDIO/VIDEO OUTPUT Interface One LNB input VIDEO PAL, SECAM Front end DVB-S compliant digital satellite Interface: 2 SCART (TV, VCR) receiver (ETS 300 421) Impedance: 75 FEC Decoder Convolutional Code Rate 1/2, 2/3, 3/4, Output level:1Vp-p 5/6 and 7/8 with constraint Length K=7 Differential gain: 5% max...