3g storm series including power tilt only elevating seat only power tilt and elevating seat 2g tarsys (2gt- tilt, 2gr- recline, 2gtr- tilt/recline) (132 pages)
Summary of Contents for Invacare One Arm Drive by lever
Page 1
I n v a c a r e One Arm Drive by lever ® Yes, you can. User guide...
Page 2
Gear lever Operating lever Stroke-adjusting sleeve Rocker beam Drive link Photo 1 – Diagram of One Arm Drive by lever Photo 1 – Diagram of One Arm Drive by lever...
Page 3
(A) on the same The one arm drive by lever is a device that allows side as the drive, on the rocker beam (B). the user to make his/her wheelchair go forward...
Page 4
To disengage the wheels, place the gear lever (D) in 2.Adjusting the muscular effort required for central position (neutral). (photo 3). driving Place the stroke-adjusting sleeve (E) of the drive link (F) higher or lower to modify the gear reduc- tion as well as the effort to be applied on the roc- ker beam (B) that provides the wheelchair drive.
Page 5
4. Disengaging the steering mechanism 3. Operating lever Retractable : Going up a steep slope or over an obstacle requi- To allow the wheelchair to get close to a table, it res the assistance of an attendant.Therefore it is is possible to dismantle the operating lever (C). sometimes necessary, for the attendant to move Remove it after releasing the indexable lever (I).
5.Adjusting the brakes Adjustment opposite the lever : The brake located opposite the lever is a parking Adjustment on lever side : brake. Place the lever in forward position; unfasten the locking nuts (L). Push the brake lever forward. Turn the brake shoe (M) on itself to adjust the Adjust the brake by unfastening the locking nuts brake.
6. Routine maintenance Weekly : - Check brake efficiency. - Check tire inflation in accordance with the speci- fications indicated on the side of the tires. Quarterly : - Lubricate the hinges of the system. - Make sure that the nuts and screws are tightly fastened.
Need help?
Do you have a question about the One Arm Drive by lever and is the answer not in the manual?
Questions and answers