Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727727 Installation Service Environmental Information Child Safety Keep this instruction book for future reference and ensure it is passed on to any new owner.
Contents For the User For the Installer Important Safety Information Building In Description of the Hob Installation Operation Electrical connections Maintenance and Cleaning Wiring diagram Something Not Working? Service and Spare Parts Customer Care Department Guarantee Conditions Description of the Hob...
Operation Electric Hotplates Suggestions for the correct setting of the plates are given To switch on a hotplate, turn the relevant control knob in the following table. anticlockwise to the required heat setting. The control knob is numbered 1 - 6 0 - OFF Very Gentle To keep food warm...
Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. If the control knobs become difficult to turn, please contact your local Zanussi Service Centre. Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply.
Something Not Working? IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Customer Care Department Customer Care Department Guarantee Conditions Zanussi Guarantee conditions European Guarantee 8.30am and 5.30pm premium Exclusions This guarantee does not cover:...
Page 8
ZANUSSI SERVICE FORCE To contact your local Zanussi Service Force Centre telephone 08705 929 929 NORTH EAST CHANNEL ISLANDS ORKNEY (M65) GATESHEAD GUERNSEY (M39) PERTH JERSEY GRIMSBY (M42) PERTH HULL (OWN SALES) (M41) SCOTLAND SHETLAND ABERDEEN (OWN SALES) (M05) LEEDS...
Page 9
ZANUSSI SERVICE FORCE To contact your local Zanussi Service Force Centre telephone 08705 929 929 MIDLANDS LONDON & EAST ANGLIA SUNBURY (M63) BIRMINGHAM BECKENHAM (M18) (M79) CHELMSFORD BOURNE SOUTH EAST (M47) (M44) ASHFORD (M58) COLINDALE BRIDGNORTH (M53) (M72) FLEET (M59)
Instructions for the Installer Engineers technical data Overall dimensions Heating elements Ratings Cut out dimensions INSTALLATION GUIDANCE INSTRUCTIONS CLEARANCES REQUIRED WHEN FITTING THE HOB WITHOUT A COOKER HOOD ABOVE Important safety requirements 700 mm 400 mm Location 400 mm FO 0812 INSTALLATION GUIDANCE INSTRUCTIONS CLEARANCES REQUIRED WHEN FITTING THE HOB...
Installation The hob must be installed according to the Once the hob has been installed, it is important instructions supplied. to remove any protective materials, which were The hob must be installed by qualified personnel to the relevant British Standards. put on in the factory.
Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg.
Need help?
Do you have a question about the ZEL 63 and is the answer not in the manual?
Questions and answers