Table of Contents
Advertisement
CAUTION:
Use only switching power adapter with following specifications:
Switching power adapter (Optional) DC 12V, 1A
Polarity: Outside negative voltage(-) & Inside positive voltage(+)
3.5mm power jack
Hardware Installation
General instructions for installing the card are provided below. Since
the design of system may vary, refer to your system's reference manual
for further information, if needed.
Insert the Card into the ExpressCard slot of your system. Make sure it
is inserted all the way in for a solid connection.
Driver Installation
Important: If your system doesn't boot to Windows properly with our
card installed, check with your system's manufacturer for the latest
system firmware update.
Page 4
Advertisement
Table of Contents
Need help?
Do you have a question about the IEEE 1394a / FirewireExpressCard and is the answer not in the manual?
Questions and answers