Restoring Default Settings; Player Information; Troubleshooting - Samsung YH-820 User Manual

YH820‡»` AME 12/31/04 10:43 AM

Restoring Default Settings

1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Reset,
and then press the SELECT button.
G If you select Reset, all selected settings will be restored to the default setting.
Settings
Reset all default
P.Saver-3sec
Settings?
Fader Effect
NO
Power off-10min
Yes
Reset

Player Information

1
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,
and then press the SELECT button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select About,
and then press the SELECT button.
G If you select About, you can check the total number of tracks, total capacity,
available capacity and software version information.
Settings
Fader Effect Tracks
Power off-10min
Capacity
Reset
Available
About Version
64
Page 64
Volume = 20
Reset
Repeat = Off
EQ = Off
Backlight = 5sec
Contrast = 2
Default Settings
About
106
3.8GB
3.8GB
0.15
One of the messages below appears:
Connect to PC and repair firmware with recovery utility.
Connect to PC and rebuild database with recovery utility.
The message "Loading" appears and the device does not operate when you turn on
the power.
File search does not work properly in the Menu Library.
The player doesn't work. There is nothing showing on the display panel.
G Reset the Player
G Connect the charger.
G Make sure the Hold switch is in the off position.
There is no sound even if I press the Play button in Music mode.
G Check if there are MP3 or WMA files on the player.
G Non-playable file formats (e.g. MPEG1 LAYER 1 file) cannot be played.
G Files that have been downloaded without using the Napster cannot be played.
I cannot download files.
G Check the battery's power level.
G Check if the driver is installed correctly on your PC.
Reinstall the software from the installation CD.
G Check the USB connection between the player and your PC.
G Check if there is the "unplug/eject" or "Safely Remove Hardware" icon located in your icon tray
at the bottom of your screen.
Cannot view image files.
G Files downloaded without using Multimedia Studio cannot be viewed on the screen.

Troubleshooting

65