CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ). The term “power tool” in the warnings refers to your mains-operated (corded) power Technical Data tool or battery-operated (cordless) power tool. DW266-XE DW268-XE DW269-XE 1) WORK AREA SAFETY Voltage 220–240...
d) Do not abuse the cord. Never use the cord for carrying, pulling or 4) POWER TOOL USE AND CARE unplugging the power tool. Keep cord away from heat, oil, sharp edges a) Do not force the power tool. Use the correct power tool for your or moving parts.
Page 5
• Young children and the infirm. This appliance is not intended for use by young WARNING: Some dust created by power sanding, sawing, grinding, drilling, and children or infirm persons without supervision. other construction activities contains chemicals known to cause cancer, birth defects –...
The tool will continue to run. retention. To turn the tool off, from a locked on condition, FIG. 3 Nutsetting Units (DW266-XE) squeeze and release the trigger once. Before using INSTALLING AND CHANGING NUTSETTERS the tool (each time), be sure that the locking button AND LOCATORS release mechanism is working freely.
NOTE: Align ribs on inside of depth locator with grooves in clutch housing. continue to seat the fastener. Further, a quick twist of the collar will change the clutch setting to overcome most driving difficulties and will provide for immediate change in DEPTH ADJUSTMENT torque output giving the operator the option to drive a wide range of fastener sizes.
Lubrication All ball and needle bearings are factory lubricated for the life of the bearing. CLUTCH LUBRICATION 1. Remove clutch housing by unscrewing (left-hand thread). 2. Lightly brush clutch faces. Repairs To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by certified service centers or other qualified service organizations, always using identical replacement parts.