Oven Racks - Panasonic NN-CD989S Operating Instructions Manual

Installation and Grounding Instructions
Wiring Requirements
1. The oven must be on a SEPARATE CIRCUIT.
No other appliance should share the circuit with the microwave oven.
If it does, the branch circuit fuse may blow or the circuit breaker may trip,
or the food may cook slower than recommended in this manual.
2. The VOLTAGE used must be the same as specified on this microwave oven (120 V, 60 Hz).
Using a higher voltage is dangerous and may result in a fire or other accident causing oven damage.
Using a lower voltage will cause slow cooking.
Our company is NOT responsible for damage resulting from the use of the oven with other than specified
voltage.
3. The oven must be plugged into at least a 15 AMP, 120 VOLT, 60 Hz GROUNDED OUTLET.
Where a standard two-prong outlet is encountered, it is the personal responsibility
and obligation of the consumer to have it replaced with a properly grounded
three-prong outlet.
Ceramic Tray
1. DO NOT operate the oven without the Roller Ring and Ceramic Tray in place.
2. Only use the Ceramic Tray specifically designed for this oven.
DO NOT substitute any other Ceramic Tray.
3. If the Ceramic Tray is hot, allow to cool before cleaning or placing in the water.
4. DO NOT cook directly on the Ceramic Tray.
Always place food in a microwave-safe dish, or on a oven rack in a microwave-safe dish.
5. If food or utensils on the Ceramic Tray touch the oven walls, causing the turntable to stop moving,
the turntable will automatically rotate in the opposite direction. This is normal.
6. The Ceramic Tray can turn in either direction.
Roller Ring
1. The Roller Ring and oven floor should be cleaned frequently to prevent excessive noise.
2. The Roller Ring must always be used for cooking along with the Ceramic Tray.
3. Always replace the Roller Ring and Ceramic Tray in their proper positions.

Oven Racks

Use these racks for Bake, Broil or Combination cooking to elevate food for proper heating.
May also be used during Microwave cooking. Arcing may occur if a metal container is used.
If this occurs, stop the cooking, change the container and re-start the program.
(continued)
- 5 -