BriteLite M2000 Operation Manual

Introduction:

Congratulations on your purchase of an M-2000 powered loudspeaker, engineered and
manufactured by BriteLite Enterprises. The M-2000 includes a high-output compression driver,
and 15" woofer to produce an even, smooth studio quality sound in a sound reinforcement
speaker. Our design goal was to build a speaker with accurate playback, smooth dispersion of
mid and high frequencies and an ergonomic design for easy transport and setup. The result is a
sound reinforcement system dynamic enough to use at home, in the studio, parties or in home
theater.

Features:


2-way Bi-amplified Active Speaker

15" Long-throw woofer with high-
temperature voice coil

Ultra-wide, smooth dispersion of
high and mid frequencies

Mic/Line input and pass-thru
connector

USB & SD Card input supports
.wav & MP3

Bluetooth Compatible

Includes FM Radio w/Antenna

Multi-function remote control

Stand/Pole-mountable
Cautions:
1. All Operating Instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open this unit. There are NO
REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4. This unit should only be cleaned with a damp cloth. Avoid solvents or other cleaning
detergents.
5. When moving this equipment, it should be placed in its original carton and packaging.
This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR
SWITCHES
8. Make sure all of your equipment is completely OFF and lower ALL VOLUME, LEVEL &
GAIN controls before connecting a sound source.
9. Only LINE LEVEL SIGNALS SHOULD BE SENT TO YOUR SPEAKER.
Failing to adhere to the cautions above will void the manufacturer warranty!
OPERATIONS MANUAL – M2000
Professional ABS Molded Loudspeaker