Factory Default Reset Button - Panasonic BL-C30C Operating Instructions Manual

Operating Instructions
3.3

FACTORY DEFAULT RESET Button

The camera has a FACTORY DEFAULT RESET button on the bottom.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera. To restore the wireless connection, access the camera by using the wired
connection and set up the wireless configuration. (See Getting Started guide.)
• Press the FACTORY DEFAULT RESET button for 1 second when the camera
is on.
• The indicator blinks orange, and then turns off for 5 seconds.
• The process of resetting to factory default takes about 1 minute. During that
time, do not turn the power off.
Notes
• The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 43). Set it again.
• See page 97—page 104 for default settings.
• All buffered images are deleted when resetting the camera to factory
default.
• The reset operation takes about 1 minute.
96
Press the button
with a pointed
object.