ThANk You For ChooSINg ThIS JBL ® We’re confident that this JBL system will provide every note of enjoyment that you expect – and that when you think about ProduCT purchasing additional audio equipment for your home, car or The JBL Cinema SB400 powered soundbar speaker system office, you will once again choose JBL products.
SouNdBAr rEAr-PANEL CoNTroLS ANd SouNdBAr ToP-PANEL CoNTroLS ANd CoNNECTIoNS rEMoTE CoNTroL Source Indicator Pairing Button HDMI ARC LEDs and LED TV Out Connector Power Cord HDMI Input Aux Input Connector Connectors Switch Connector Power Source Volume Surround Bluetooth Button Button ModeButton Buttons Button...
Power Cord connector: Connect the included power cord here and more information. into an active, unswitched AC outlet. See Power Connections, on page 5, for more information. IMPORTANT: Do not connect the power cord to an AC outlet until you have made and verified all other connections. www.jbl.com...
SouNdBAr PLACEMENT IMPORTANT: Do NOT plug the soundbar’s power cord into an AC outlet at this time. PLACING THE SOUNDBAR ON A TABLE • Set the soundbar’s EQ switch in the “Wall” position, and set the If your TV is placed on a table, you can place the soundbar on the table soundbar’s Power switch in the “On”...
AC Outlet AC Outlet possible video and audio performance quality. Since the HDMI cable carries both digital video and digital audio signals, you do not have to make any additional audio connections for source devices you connect via HDMI connectors. www.jbl.com...
To put the soundbar in the Standby mode, press either Power button then will disappear. (When you select an audio-only source connection while the soundbar is on. (Aux, Optical, Bluetooth), the OSD information will overlay a JBL splash screen.) Power Button...
Bluetooth.) The active source’s Source Indicator Display Surround setting for music. LED will illuminate. Source Button Surround Button BLUETOOTH AUX IN OPTICAL HDMI TV HDMI1 HDMI2 HDMI3 BLUETOOTH AUX IN OPTICAL HDMI TV HDMI1 HDMI2 HDMI3 Surround Button Source Buttons www.jbl.com...
BooSTINg ThE BASS SUBWOOFER PHASE SWITCH Press the remote’s Bass Boost button to enhance low-frequency PHASE performance, resulting in bass with more impact, which you may prefer while watching movies or listening to music. The OSD will display “Bass On” as the sound mode. There is no harm in experimenting with this control.
A) Hold Down Soundbar’s Volume + Button CINEMA SB400 SYSTEM Frequency response: 38Hz – 20kHz (–6dB) CINEMA SB400 POWERED SOUNDBAR SPEAkER Midrange transducers: Two 2-1/4" (57mm) cones per channel High-frequency transducer: One 1" (25mm) dome per channel B) Press TV Remote’s...
Need help?
Do you have a question about the CINEMA SB400 and is the answer not in the manual?
Questions and answers