Do you have a question about the AI-215 Series and is the answer not in the manual?
Questions and answers
Pat Williams
March 7, 2025
I cannot get my ice maker to make small cubes regardless of how many times I tried to set the size of the ice, even if I have it set on small for the size it makes the larger cubes instead. I’ve tried to unplug it and wait a few minutes and plug it back in, but it still makes the larger cubes. Is there any other way to get it to reset??
1 comments:
Mr. Anderson
March 7, 2025
To reset the NewAir AI-215 Series ice maker to produce small ice cubes, press the "Select" button on the front of the ice maker until the small ice cube size icon lights up. The ice-making process will then start automatically.
Page 1
AI-215 Series Portable Ice Maker OWNERS MANUAL Read and save these instructions.
Page 2
Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
EAD AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Safety Information & Warnings ................4 Parts List ....................... 5 Basic Parts Diagram ..................5 Control Panel Diagram ................. 6 Assembly & Installation ..................7 Operating Instructions ..................8 Making Ice ....................8 Using the Timer ....................
If the ice maker is brought in from the outside in the winter, allow the ice maker to warm up to your room’s temperature for a few hours before plugging it in. Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or cause an explosion. http://www.NewAir.com...
Do not touch the evaporator while the unit is in use or during the ice making process. It may cause severe burning. PARTS LIST BASIC PARTS DIAGRAM 1. Cover 2. Control Panel 3. Water Drain Cap 4. Ice Basket 5. Ice Scoop 6.
CLEAN – Begin self-cleaning function (refer to page 7) LCD DISPLAY SYMBOLS: Power indicator Ice Bucket Full Indicator Ice size selected Add Water Indicator (small, medium (flashes when water or large) needs to be added) Timer display Warning Indicator – problem with unit Self-Cleaning Indicator http://www.NewAir.com...
ASSEMBLY & INSTALLATION Remove the exterior and interior packaging. Check that the ice basket and ice scoop are included. If any parts are missing, please contact customer service. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it.
Change the water in the reservoir every 24 hours to ensure hygienic ice. If the ice maker will not be used for an extended period of time, drain the water from the reservoir by unplugging the drain off cap located on the side of the ice maker. http://www.NewAir.com...
USING THE TIMER How to Set the ON-TIMER Program When the unit is off, you can program the timer to start the unit after a set number of hours. 1. Press the TIMER button on the control panel. “1.0H” will flash in the Timer Set Display Window.
Drain and refill the reservoir with clean, warm water. Run two more cycles to rinse the vinegar or lemon-juice. When the machine is not in use open the water drain cap to completely drain the water reservoir. http://www.NewAir.com...
STORAGE Before storing your ice maker, clean it according to the directions above and allow it to dry thoroughly – at least 24 hours – in order to prevent the growth of mold or mildew. Store your ice maker in the original packaging, or cover with a soft cloth or plastic sheet.
Page 12
As ice produced too quickly. develops on the surface of water, certain gases can no longer remain dissolved and begin to surface as microscopic bubbles. This cloudiness is normal. http://www.NewAir.com...
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.
Need help?
Do you have a question about the AI-215 Series and is the answer not in the manual?
Questions and answers
I cannot get my ice maker to make small cubes regardless of how many times I tried to set the size of the ice, even if I have it set on small for the size it makes the larger cubes instead. I’ve tried to unplug it and wait a few minutes and plug it back in, but it still makes the larger cubes. Is there any other way to get it to reset??
To reset the NewAir AI-215 Series ice maker to produce small ice cubes, press the "Select" button on the front of the ice maker until the small ice cube size icon lights up. The ice-making process will then start automatically.
This answer is automatically generated