NEC DS2000 Feature Handbook page 176

Speed Dial
To program a Personal Speed Dial number:
1. Press
Press
2. Dial the personal bin number (normally 701-720).
Press a Personal Speed Dial key (for bins 1-10).
Press
3. Press
4. Enter the line number you want the system to use when
dialing your stored number (e.g., 1 for line 1).
Enter the line group number you want the system to use
when dialing your stored number (e.g., 90 for group 0).
Press
5. Press
6. Enter the number you want to store (up to 16 digits long).
7. Press
8. Enter a name for the Speed Dial number.
168
and dial
OR
PGM SPD
+
OR
OR
+ a Personal Speed Dial key (for bins 11-20).
.
OR
OR
if you want to enter Intercom codes.
.
You can enter any combination of the digits 0-9, #
and *. To insert a pause in your Speed Dial number,
press . To insert a Flash in your Speed Dial
MIC
number, press
FLASH
.
See Entering Speed Dial Names on page 170 for
more.
.
.
. These entries count as digits.