Download
Share
Print this page
Mamas & Papas Vito TT Instructions For Safe Use
  1. Manuals
  2. Brands
  3. Mamas & Papas Manuals
  4. Car Seat
  5. Vito TT
  6. Instructions for safe use

Mamas & Papas Vito TT Instructions For Safe Use

Mamas & papas vito tt child seat instructions for safe use
Hide thumbs Also See for Vito TT:

Advertisement

Quick Links

Download this manual
Vito TT
VOTT_0118_1011_V1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vito TT and is the answer not in the manual?

Questions and answers

Related Manuals for Mamas & Papas Vito TT

Summary of Contents for Mamas & Papas Vito TT

  • Page 1 Vito TT VOTT_0118_1011_V1...
  • Page 2 UNIVERSAL CATEGORY 9-18 Kg Y BELTED E N•The "Vito TT" child seat is attached to the car using its seat belt.
  • Page 3 UNIVERSAL CATEGORY 9-18 Kg Y ISOFIX & TOP TETHER E N•The "Vito TT" child seat is attached to the car using the ISOFIX system.
  • Page 4 UNIVERSAL CATEGORY 9-18 Kg Y BELTED...
  • Page 7 UNIVERSAL CATEGORY 9-18 Kg Y ISOFIX & TOP TETHER...
  • Page 8 PUSH...
  • Page 17 Vito TT 1) BMADUO00• 2) BRIDUO00• 3) MUCI0082N 4) BSPDUO00• E N• Spare parts available in different colours to be specified when ordering.
  • Page 18 EN_English In order to prevent an unsuitable (i.e. non Top Tether) fastener being used, the car's TT fastener is generally marked by a label bearing the following logo: IMPORTANT: TOP TETHER Read carefully for proper use of your new Mamas & Papas child seat: Vito TT. Vito TT is the latest Mamas & Papas child seat for children weighing 9-18 kg. It conforms to the European R44/04 Directive. Vito TT uses the ISOFIX fastening device with Top Tether, in compliance with the most up-to-date European Directives, as a guarantee of utmost safety For more information and greater safety, consult your and reliability. vehicle's instruction and maintenance booklet. All recently produced vehicles are equipped by law Ensure the child seat is securely fastened using the Top both with the ISOFIX fittings, placed where the backrest Tether strap. This not only guarantees utmost safety in meets the seat, and with the TOP TETHER connector. the event of collision, but also maximum child stability This is normally located on the shelf behind the rear during normal use. seat in saloon vehicles (photo A), behind the rear seat in Please remember that if necessary Vito TT can also hatchbacks (photo B), or in the boot in people carriers be fastened using the standard three-point seats belt and in SUVs / off-road vehicles (photo C): available by law on any vehicle.

  • Page 19: Product Characteristics

    Thank you for choosing a Mamas & vehicle’s normal direction of travel. • Do not fit “Vito TT” on vehicle seats that face away Papas product. or sideways with respect to the normal direction of travel of the vehicle. • We recommend that you always use the rear seat Product Characteristics on the opposite side to the driver’s seat. Child seat, Group 1, • If it is fitted on the vehicle’s front seat, the car seat “Universal” category with belts should be positioned as far as possible from the dashboard. • Approved under European standard UN/ECE R44/04 for • The item is given a serial number. children weighing from 9 to 18 kg (from 1 to 4 years • If you have any difficulty fitting Vito TT in your car, approx). lift up or remove the vehicle’s headrests. • Suitable for installation on the majority of vehicle seats, • Do not use without the Top Tether strap. The Top but not all. Tether strap is essential in order to guarantee • The car seat can be correctly installed if the vehicle's complete safety.
  • Page 20 compliant with standards. observe him/her even when he/she is sleeping. • Do not use accessories that are not approved by the • Never remove the child from the car seat while the manufacturer or by the competent authorities. vehicle is in motion. • Make sure that the car seat is not obstructed by any Instructions for use moving parts of the vehicle’s seat or by one of the UNIVERSAL CATEGORY - Belted doors. Fastening with seat belts • Adjust the height and tension of the straps, ensuring that they are snug to the child's body without being 1• Place the Vito TT car seat on the vehicle’s seat, facing in too tight. Check that the harness is not twisted and the normal direction of travel of the vehicle, as shown that the child does not release it. in the figure. The car seat is equipped with a protective • This car seat is not designed for extended periods of sleep. base. • Do not leave the car seat in vehicles exposed to the Do not remove it when fitting the car seat with the sun. Some parts might heat up and be harmful to the safety belts. delicate skin of the child – check before placing the 2• To make it easier to pass the vehicle’s safety belts child in the seat.
  • Page 21 to its lowest position. in the boot. This is generally marked by the Top Tether 10• Press the front lever located inside the base, as shown symbol, as shown in the figure. Lift the cover and in the figure, to extract the Isofix fasteners. fasten. 11• Open the rear panel and extract the Top Tether straps (TT). IMPORTANT: To fit the belts correctly, pull them When the Top Tether is not in use, place it in the firmly. storage compartment and fasten it as shown. 12• Fasten the booster seat Isofix joints to the car seat For any other fastening system, consult your fasteners until they click. To do this, press the yellow vehicle's instruction booklet. buttons as shown in figure. IMPORTANT: Ensure the child seat is securely How to put the child in the Vito TT car fastened by checking that the indicators to the sides of seat the child seat's Isofix fasteners become green on both 1 7• Before sitting the child on the stroller, release the safety sides (as shown in the figure). harness by pushing the red button in the buckle of the 13• For the child seat to adhere completely to the car seat, leg divider strap. pull the base's front strap towards you and at the same 18• Lift the safety harness and attach the buckles to the time push the child seat against the car seat (as shown elastics in the sides. in the figure). 19• Sit the child in the stroller and adjust the safety straps round IMPORTANT: When finished, move the child seat to the child’ s shoulders and waist, as shown in the picture. ensure the Isofix fasteners are securely fastened. 20• Fasten the harness by overlapping the two straps and TOP TETHER FASTENER inserting the buckles into the leg divider strap until they click into place.

  • Page 22: Serial Numbers

    How to adjust the height of the head rest • Do not use chlorine bleach. • Do not iron. The head rest must be adjusted to match the child’s • Do not dry clean. height. There are 7 positions. Do not remove stains with solvents. 25• To change from a lower position to a higher one: • Do not tumble dry. pull the strap in the upper central part of the headrest upwards. The headrest will move at the same time. ° To change from a higher position to a lower one: pull the strap in the upper central part of the headrest upwards and, at the same time, push the headrest How to replace the lining on the Vito down to the desired position. TT car seat When you have finished, try moving the headrest to check it is properly attached. To replace the lining of the Vito TT 2 6• When the straps are positioned correctly, the child’s To replace the lining of the Vito TT child seat: shoulders will be just below the point where the straps 3 5• From below, slip the safety straps back in through the pass. slit in the fabric. 2 7• IMPORTANT: The straps must not be too high or too • Reinsert the strap into the fabric leg divider. low with respect to the child’s shoulders. 36• Fasten this into the hole in the frame. 2 8• The Vito TT child seat can be reclined into 5 positions.

  • Page 23: Product Cleaning

    This information is required for any complaints. Product cleaning • This product requires a small amount of maintenance. Cleaning and maintenance must only be carried out by adults. • Keep all moving parts clean and if necessary lubricate them with light oil. • Clean the plastic parts periodically with a damp cloth. Do not use solvents or similar substances. • Brush the fabric parts to remove dust. • Do not clean the polystyrene shock absorbing device with solvents or other similar products. • Protect the product from atmospheric agents: humidity, rain or snow. Extended exposure to sunshine can cause colour changes in many materials. • Store the product in a dry environment. How to read the approval label /mamasandpapasuk • This paragraph explains how to interpret the approval label (orange label). • The label is double because this car seat is approved for two types of installation in cars: • ISOFIX attachment systems (the term SEMI- UNIVERSAL class A indicates compatibility of the car @mamasandpapas seat with vehicles fitted with this system). • Attachment systems using static or inertia-reel three-point safety belts (the term UNIVERSAL indicates compatibility of the car seat with vehicles fitted with this type of belt).
  • Page 24 Vito TT Mamas & Papas Colne Bridge Road FIUK1101I143 Huddersield, HD5 0RH 05/12/2011 customer care helpline: customer.care@mamasandpapas.com VOTT_0118_1011_V1...