Configuring Password Protection With F-Secure; Changing Time - Fujitsu Pocket LOOX 600 Easy Manual

Configuring Pocket LOOX 600
Alphanumeric password
Ê
Touch the desired password on the keypad. The password must consist of at least
7 characters and a combination of uppercase and lowercase letters and numbers or
punctuation marks.
Ê
Touch the lower entry field with the stylus. Repeat the password entry to confirm it.
Ê
Touch OK (navigation bar) to confirm your setting.
A dialog box appears.
Ê
Confirm with Yes.
The Pocket LOOX 600 is now protected with a password.
Switch off the Pocket PC by briefly pressing the Suspend button.
The next time you switch on your Pocket PC you must first enter the password before the Today
screen or the content on which you last worked appears on the display.
If you have forgotten your password, you can restart your Pocket LOOX 600 by resetting it to the
delivered state with the General Reset switch.
If the device is switched off with the General Reset switch, the battery is switched off so
!
that the RAM contents are lost. You loose all data (documents, additionally installed
programs, personal settings) that you haven't saved elsewhere.
Therefore, remember to make a regular data backup with synchronisation (see the
chapter "Synchronising data with ActiveSync") or on corresponding memory cards
(available as an accessory). The program LX Backup is provided on your Pocket LOOX
600 for completely backing up the RAM memory.

Configuring password protection with F-Secure

The program F-Secure is installed on your Pocket LOOX 600 with which you can configure an
extensive password protection for your Pocket PC. Detailed information on the various ways to
protect your Pocket LOOX 600 against unauthorised access with F-Secure is contained in the
"F-Secure User's Guide" manual on the "Pocket LOOX AddOn & Documentation" CD.

Changing time

During the initial start-up you entered the time zone of your location and set you system clock.
If you would like to change the time, proceed as follows:
Ê
Touch Start.
Ê
Select the Settings entry in the menu.
Ê
Select the System tab.
Ê
Touch the Clock symbol.
Ê
Depending on your preference, you can change the time by moving the click hands or by
entering the desired time.
Ê
Touch OK (navigation bar) to confirm your setting.
In addition, you can also activate a second time, for example in another time zone. This informs you
of the time of day of your business partners at all times or provides you with an overview of both the
time in the country you are travelling in and at home.
46
A26391-K120-Z120-3-7619