iBabyGuard Infant Snooze Baby Sleep Monitor User Manual
Hide thumbs
Also See for Infant Snooze Baby Sleep Monitor:
- User manual (22 pages) ,
- User manual (30 pages)
Related Manuals for iBabyGuard Infant Snooze Baby Sleep Monitor
Summary of Contents for iBabyGuard Infant Snooze Baby Sleep Monitor
-
Page 1: User Manual
Infant Snooze Baby Sleep Monitor User Manual www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 2 (Parent Unit ) is included in the product. It can be used in place of the smartphone Apps. Only either the iBabyGuard™ Infant Snooze smartphone Apps or the Parent Unit can be used for communication with the Infant Snooze at any one time, but NOT both can be used simultaneously.
- Page 3 Warning and disclaimer iBabyGuard™ Infant Snooze is NOT a medical device or a diagnostic device to prevent Sudden Infant Death Syndrome (SIDS) or ‘cot death’. Babies with a known predisposition to any breathing abnormality including apnea, obstructive sleep apnea should be monitored by a doctor. Please seek advice from doctors or health care professional for medical diagnosis or when unsure of any symptoms.
- Page 4 DO NOT put the Parent Unit near wireless devices or a microwave oven. Such devices can disrupt the transmission of the alarm signal. The operating temperature range for the iBabyGuard™ Infant Snooze is from C - 40 C. DO NOT operate beyond this range as it may not function according to defined specifications.
- Page 5 Infant Snooze Smartphone Apps Status Indication Summary Sheet Status indication Event Remarks The display will indicate an hour glass Calibration in progress rotating in a circular motion The display will be as shown when baby Sleeping is sleeping soundly.
- Page 6 / Weight limit the mat or the baby sitting up. The exceeded alarm will also be activated. Error 9: Device Malfunction Please contact your service centre means any other number than 1 and 8 www.iBabyGuard.com Copyright 2012 iBabyGuard International...
- Page 7 Infant Snooze or the baby sitting / Weight limit exceeded up. The alarm will also be activated. Error 9: Device Malfunction Please contact your service centre means any other number than 1 and 8 www.iBabyGuard.com Copyright 2012 iBabyGuard International...
-
Page 8: Table Of Contents
BABY ACTIVITY STATUS INDICATION ON SMARTPHONE ..............15 Sleeping ............................15 Baby movement .......................... 15 Baby absence ..........................16 ALARM CONDITIONS FOR THE SMARTPHONE APPS ................16 Clearing of alarms ........................16 No breath movement........................17 Wake up alert ..........................17 www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 9 Audio Monitor ..........................26 Speaking to your baby......................... 26 BABY ACTIVITY STATUS INDICATION ON PARENT UNIT ..............27 Sleeping ............................27 Baby movement .......................... 27 Baby absence ..........................27 ALARM CONDITIONS FOR THE PARENT UNIT ................. 27 www.iBabyGuard.com Copyright 2012 iBabyGuard International...
- Page 10 11.6 Error 8: Weight limit indication for the Infant Snooze ............... 31 11.7 Error 9: Device malfunction ......................31 TROUBLESHOOTING AND FAQ ......................32 MAINTENANCE ..........................33 TECHNICAL SUPPORT ........................33 LIMITED WARRANTY ........................34 www.iBabyGuard.com Copyright 2012 iBabyGuard International...
-
Page 11: Getting Started
1. GETTING STARTED Package contents iBabyGuard™ Infant Snooze Your package includes: Infant Snooze Quick Start Guide Before you can use the mat, you need the following (not included in the product): 4 X AA dry cell battery for the Infant Snooze... -
Page 12: Parts Description For The Infant Snooze(Model Ibg Isnooze 5M)
Output lullaby music stream from smart phone (Output parents / caregivers voice only Speaker when Parent Unit is used) Battery compartment of Uses 4 x AA dry cell batteries for the Infant Snooze (Batteries not included) Infant Snooze For monitoring baby www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 13: Parts Description For The Parent Unit (Model Ibg Isnooze 5C)
Press to talk to your baby remotely Speaker Listen to sound from your baby Microphone To talk to your baby when press & hold on the TALK button Volume To adjust volume for the Parent Unit www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 14 Alarm select switch To select the alarm type Battery Uses 2 x AAA dry cell batteries (Batteries not included) Compartment Lanyard hole To insert a lanyard (Lanyard not included with the product) www.iBabyGuard.com Copyright 2012 iBabyGuard International...
-
Page 15: Setting Up The Infant Snooze With The Smartphone Apps
Infant Snooze will light up. HINT: Check the mat LED indicator. It will light up alternating between green and red colour during initial pairing mode, will show green colour once connection is established with the smartphone Apps. www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 16 Power on the Smartphone Apps For first time use, Download the iBabyGuard™ Infant Snooze Apps from the Google Play store. Install the iBabyGuard™ Infant Snooze Apps. Go to Settings -> Wireless & networks -> Bluetooth settings ->...
-
Page 17: Settings On The Smartphone Apps
Consider switching to vibration mode when parent/caregiver needs a rest from looking after the baby. WARNING: Setting for alarm type does not apply to mandatory alarm for no breath movement condition. Refer to section 4.2 for details. www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 18 WARNING: Alert will be disabled during music / lullaby stream to prevent false alert due to sound. It is advisable NOT to disable alarm when your baby is unwell or need extra attention. www.iBabyGuard.com Copyright 2012 iBabyGuard International...
- Page 19 LCD screen as shown (highlighted in red). HINT: When baby is moving extensively and the display does NOT show strong movement, set higher sensitivity. Set lower sensitivity when baby is sleeping soundly and the display shows strong movement. www.iBabyGuard.com Copyright 2012 iBabyGuard International...
- Page 20 LCD screen as shown (highlighted in red). Temperature unit There are 2 units for selection to display for the ambient temperature, namely Celsius ( C) or Fahrenheit Tap the commonly used unit for your location. www.iBabyGuard.com Copyright 2012 iBabyGuard International...
- Page 21 All logged data on the Infant Snooze will be erased WARNING: Existing recorded baby data stored on the smartphone will be erased during factory reset. Version The current version of the Apps is indicated in the Settings tab under “General Settings”. www.iBabyGuard.com Copyright 2012 iBabyGuard International...
-
Page 22: Key Features Of Smartphone Apps
2.2 Ambient temperature display The ambient temperature of the room where your baby is sleeping is displayed on the top left-hand corner as shown. WARNING: Temperature displayed is ambient room temperature and NOT the temperature of your baby. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 23: Streaming Of Music / Lullaby
Go to Settings -> Wireless & networks -> Bluetooth settings -> Tap on “Scan for devices” Tap on the Bluetooth device name for the iBabyGuard™ Infant Snooze to pair with the Infant Snooze WARNING: Music stream function is enabled only when the Infant Snooze is powered on. -
Page 24: Baby Sleep Log
The graphical pattern and iconic representation of the current baby activity will be displayed. WARNING: Breath Scope function is enabled only when the Infant Snooze is powered on. Graphical pattern are based on current baby activity status and cannot be recorded. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 25: Baby Activity Status Indication On Smartphone
The display will be as shown when your baby is sound asleep. The baby breath movement count per minute (BPM) is indicated on the top right-hand corner. 3.2 Baby movement The display will be as shown when your baby is moving. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 26: Baby Absence
The mandatory alarm is not user-selectable. 4.1 Clearing of alarms The display will be as shown in any alarm condition. To clear the alarm, Tap ‘OK’ The current baby activity state triggering the alarm will be displayed www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 27: No Breath Movement
Alert will be disabled during music / lullaby The wake up alert can be enabled or disabled in the Settings tab. stream to prevent false alert due to sound. HINT: Only place the baby on the Infant Snooze when baby is asleep www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 28: Baby Absence Alert
- rendering the current state of the baby to be non- deterministic. As a precaution for the unknown states, the display will be indicated as shown, to alert parents/caregivers to check on the baby. Please attend to your baby. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 29: Other Status Indications On The Smartphone Apps
To manually pair the Infant Snooze with another Smartphone, do the following. turn off the iBabyGuard™ Infant Snooze Apps on the current phone turn off & on the Infant Snooze again. The LED will be blinking red & green to indicate pairing mode ... -
Page 30: Low Battery Alert For Infant Snooze
Infant Snooze Apps to pair with the Infant Snooze 5.3 Low battery alert for Infant Snooze When the battery of the Infant Snooze is low, low battery alert for the Infant Snooze will be indicated as shown. Tap “OK” to clear alert and return to baby activity monitor state. -
Page 31: Error 8: Weight Limit Indication For The Infant Snooze
Infant Snooze. 5.6 Error 9: Device malfunction The product may have malfunction. The display will be as shown with an error number and alarm will be activated. Please contact your service center. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 32: Exceptions Management For Smartphone
Note: Some phone models may not light up the LCD screen when alarm is triggered. Using another Apps iBabyGuard™ Infant Snooze Apps needs to be running and should NOT be exited. Alarm condition will trigger the audible alarm and iBabyGuard™... -
Page 33: Setting Up The Infant Snooze With Parent Unit
Place the Infant Snooze on the cot, mattress or any flat surface. Put your baby on the Infant Snooze. Press the power button at the tip of Infant Snooze frame as shown. The LED indicator on the top of the Infant Snooze will light up. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 34: Setting Up The Parent Unit
LCD display accordingly when pushing the switch. HINT: Consider switching to vibration mode when parents / caregivers do not want to disturb others around them with the sound alarm. www.iBabyGuard.com Copyright 2012 iBabyGuard International... - Page 35 An alert icon will be indicated on the top of the LCD as shown (highlighted in red) when alarm is enabled. WARNING: It is advisable NOT to disable alarm when your baby is unwell or need extra attention. www.iBabyGuard.com Copyright 2012 iBabyGuard International...
-
Page 36: Key Features Of Parent Unit
The talk icon will pop up as shown when TALK button is pressed. Release TALK button when not speaking. WARNING: Sound activity from your baby is not transmitted when the TALK button is pressed. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 37: Baby Activity Status Indication On Parent Unit
Alarm can be cleared by pressing any of the 3 buttons on the front side of the Parent Unit . WARNING: The default function for each of the 3 button is disabled during alarm condition and used only to clear alarm. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 38: No Breath Movement
20 seconds and sound are detected. The display will be as shown. HINT: Only place the baby on the Infant Snooze during baby nap/sleep time. This alert can be enabled or disabled with the alert enable button www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 39: Baby Absence Alert
To maintain connection, Walk closer towards the Infant Snooze with the Parent Unit The connection period is a 5 minutes window, after which the Parent Unit will power off. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 40: Manual Pairing Of Infant Snooze And Parent Unit
Infant Snooze is low. In the case of no connection of the Infant Snooze with the smart phone, the Infant Snooze red LED will blink. Replace battery for the mat. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 41: Error 1: Fiber Sensor Is Broken
Infant Snooze. 11.7 Error 9: Device malfunction The product may have malfunctioned. The display will be blinking as shown with an error number. Please contact your service center. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 42: Troubleshooting And Faq
Parent Unit Unit link. Battery is not inserted on the Infant Snooze. Enable manual pairing (refer to Section 6: Other status indication) Ensure battery is inserted on the Infant Snooze. www.iBabyGuard.com Copyright 2012 iBabyGuard International... -
Page 43: Maintenance
Remove batteries from the Parent Unit and Infant Snooze when not in use for a long period of time. The operating temperature range for the iBabyGuard™ Infant Snooze is from C - 40 C. DO NOT operate beyond this range as it may not function according to defined specifications. -
Page 44: Limited Warranty
FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For any technical assistance contact the technical support center online : support@ibabyguard.com. www.iBabyGuard.com Copyright...
Need help?
Do you have a question about the Infant Snooze Baby Sleep Monitor and is the answer not in the manual?
Questions and answers