Summary of Contents for LiteOn LVC-9016G
- Page 1 VCR/DVD Recorder LVC-9016G/9017GDL SIMPLY AMAZING ! DVD-R/-RW, DVD+R/+RW, DVD+R DL* Disc Recording (*LVC-9017GDL)
-
Page 2: Table Of Contents
Table of Contents Copying Tapes/Discs Getting Started Copying from VHS to Disc ..........24 Accessories ................1 Copying from Disc to VHS ..........24 Important Safety Instructions ..........2 Warnings, Cautions and Others ........... 3 Playback Media Information ............... 4 Playing DVD Disc ............... -
Page 3: Important Safety Instructions
Important Safety Instructions Read instructions. Read all the safety and operating 16) Outdoor Antenna Grounding - If an outside antenna or instructions before operating the product. cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some Retain instructions. -
Page 4: Warnings, Cautions And Others
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.” Laboratories. FCC Declaration of Conformity VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Model: LVC-9016G/LVC-9017GDL Corporation. The VCR Plus+ system is Trade Name: LITEON manufactured under license from Gemstar Responsible party: Development Corporation. -
Page 5: Media Information
Media Information Playable Media Types M e d i a T y p e s L o g o s I n f o r m a tio n P r e s e t D V D -V i d e o d i s c s ( T h e r e g i o n c o d e is p r i n t e d o n t h e r e a r o f r e c o r d e r ) D V D - V I D E O D V D - R , D V D -R W , D V D + R a n d D V D + R W d i s c s w r i t t e n i n... -
Page 6: Controls And Displays
Controls and Displays Remote Control The Remote Control 1. Eject button ( EJECT) 2. Power button ( POWER) 3. Number buttons (0~9) 4. VHS button (VHS) 5. DVD button (DVD) 6. Track up button (TRACK+) / Track down button (TRACK -) 7. -
Page 7: Front-Panel Connections
Controls and Displays Front-panel Connections (For Reference Only) Names of parts and controls 11) RECORD button 1) POWER button Starts recording Lights green when power is on Lights red when power is off 12) SOURCE button 2) VCR indicator Press to select signal input Lights green when VCR deck is controllable 13) DISPLAY WINDOW Lights orange when VCR deck is busy... -
Page 8: Rear-Panel Connections
Controls and Displays Rear-panel Connections (For Reference Only) Names of parts 1) RF OUT/IN jacks 5) LINE OUT (VIDEO/AUDIO L/R) jacks RF signal output/input Composite signal output Note: Playback signals are not transmitted via this connection. 6) LINE OUT (S-VIDEO) jack Make proper connections before using this VCR/DVD recorder. -
Page 9: Connecting Up
Connecting up Before making connections 1) Do not connect the AC power cord until all other connections are made. 2) Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a viewing problem when playing back a copy-protected disc. -
Page 10: Enhanced Video Options
Enhanced Video Options If your TV has S-Video or Component Video inputs, you can enjoy better picture quality. 1. Connecting to a TV via S-Video out Connecting to a TV with S-Video jack Connect an S-Video cable from the VCR/DVD recorder to your TV as shown. Note: 1. -
Page 11: Enhanced Audio Options
Enhanced Audio Options If you have a stereo system or digital audio receiver, you can enjoy better sound quality. Connecting to a Stereo Audio Amplifier or Receiver Connect left/right audio cables (not supplied) from the VCR/ DVD recorder to your stereo system as shown. Connecting to a Digital Audio Device Connect an amplifier with Dolby Digital and DTS decoders to enjoy surround sound. -
Page 12: Connecting A Satellite Receiver Or Cable Box
Connecting a Satellite Receiver or Cable Box Connecting a Cable Box, Digital Cable Box or Satellite Receiver Before using the unit, follow the steps listed below to connect the VCR/DVD recorder to an external receiver and the TV. Connecting to a cable box, digital cable box or satellite receiver with COMPOSITE jacks 1. -
Page 13: System Setup
System Setup This chapter helps you to customize the VCR/DVD recorder to 5. When completed, press [ ] repeatedly to return to the main meet your system requirements and set your personal preferences. menu or press [SETUP] to exit the Setup menu. Using the Setup Menu Progressive scan mode 1. -
Page 14: Tv Channel Setup
TV Channel Setup Scanning TV Channels When the “Scan Channel” function is activated, the TV channels are searched and stored in a specific order. If the channel assign- ment of your TV content provider changes, or if you are reinstalling the unit, you may need to go through this process again. -
Page 15: Channel Editor
Channel Editor Before using ‘Channel Editor’ menu Make sure that the antenna cables are securely connected to Renaming TV Channels the unit. 1. On the “Channel Editor” menu, press [ ] [ ] to Adding or Deleting TV Channels select one of the TV channels and press [ ]. 1. -
Page 16: Mapping Channels For The Vcr Plus+ System
Channel Editor Swapping TV Channels 6. Press [ ] [ ][ ] [ ] to enter the Guide Channel Number (GCN) and press [ENTER]. This function allows you to manually change the TV channel positions stored in the unit to match those stored in your TV set. 1. -
Page 17: Recording
Recording *LVC-9016G: This unit can record on DVD-R/-RW, DVD+R/+RW Press [RECORD] to start recording. discs and VHS tapes. After [RECORD] is pressed, it may take a few seconds for the unit *LVC-9017GDL: This unit can record on DVD-R/-RW, DVD+R/ to initialize. -
Page 18: Adding New Recordings
Recording Adding New Recordings Using DVD Menu The DVD menu displays all the titles (programs) recorded on a Press [RECORD] to start a new recording session and disc.You can directly select the one you want to play on the menu. press [ STOP] at the point you want to stop. -
Page 19: Recording From External Devices: Vcr Or Camcorder
Recording To start recording: Press [ GUIDER] 1. Press [ GUIDER] to display the Easy Guider menu. 1. Press [SETUP] and then select “Record” to set the 2. Press [ ] [ ] to select “Playback” and then press desired recording mode. [ENTER]. -
Page 20: Recording From External Devices: Dv Camcorder
Recording Recording from External Devices: DV 8. Resume playback of the DV camcorder and press Camcorder [RECORD] on the remote control to start recording. 1. Connect the DV camcorder to the unit using an IEEE-1394 4-pin cable. Press [ PAUSE ] to pause recording. Press [ PAUSE ] again or [RECORD] to resume recording. -
Page 21: Using "Easy Guider" To Record Dv Signals
Recording 9. Press [ ] [ ] to select a recording quality and Using “Easy Guider” to Record DV Signals press [ENTER]. 1. Connect the DV camcorder to the unit using an Disc Quality Tape Quality IEEE-1394 4-pin cable. 2. Turn on your TV and this unit. 3. -
Page 22: Timer Recording
Timer Recording 7. Press [ ] [ ] to select “Date” and press [ENTER] . *LVC-9016G: This unit can record on DVD-R/-RW, DVD+R/+RW Press [ ] [ ] [ ] [ ] to make your selection and [ENTER] for discs and VHS tapes. -
Page 23: Setting Timer Program
Timer Recording 12. Press [ ] [ ] to select the icon and press Recording TV Programs Using the VCR Plus+ ® [ENTER] to exit the Timer-Record menu. System 1. Press [ POWER] to turn on the unit. 2. Make sure that a recordable disc or a VHS tape is inserted or loaded for recording. - Page 24 Timer Recording 8. Press [ ] [ ] to select “Date” and press [ENTER] . Press [ ] [ ] [ ] [ ] to make your selection and [ENTER] for confirmation. To enter the number, use the number buttons (0~9). Once DATE: MM/DD Weekly...
-
Page 25: Copying Tapes/Discs
Copying Tapes/Discs *LVC-9016G: This unit can record on DVD-R/-RW, DVD+R/+RW Copying from Disc to VHS discs and VHS tapes. Follow these steps to copy contents on a disc to a VHS tape. *LVC-9017GDL: This unit can record on DVD-R/-RW, DVD+R/ +RW, DVD+R DL (double layer) discs and VHS tapes. -
Page 26: Playback
Playback DVD/VCD/SVCD video disc and video cassette playback Before you can start to enjoy the digital audio and video on DVDs or video cassettes, make sure you have made necessary system settings through the Setup menu, so that the VCR/DVD recorder corresponds to your other home systems. Having made these settings, you are now ready to start using the unit to enjoy DVDs, Video CDs, and CDs and video cassettes. -
Page 27: Playing Vhs Tape
Playback Playing VHS Tape Press [ PAUSE] again to start “frame by frame mode”. Turn on the television and select the appropriate video input on the Press repeatedly to advance recordings frame by frame during television to suit the connections for this VCR/DVD recorder. playback in pause mode. -
Page 28: Navigation Menu (For Disc)
Playback SUBTITLE Navigation Menu (For Disc) To select a subtitle language from those available on the current During disc playback, press [NAVI.] to display the Navigation disc during playback. menu. Press [ ] [ ] [ ] [ ] to move the highlight around and press [ENTER] for confirmation. -
Page 29: Navigation Menu (For Vhs Tape)
Playback Navigation Menu (For VHS Tape) During VHS tape playback, press [NAVI.] to display the Navigation menu. Press [ ] [ ] [ ] [ ] to move the highlight around and press [ENTER] for confirmation. Notes: Pressing [ ] takes you to the next level of menu. Pressing [ ] at the main level of menu closes the Navigation menu. -
Page 30: Playing Jpeg Files
Playback The unit can play an Audio CD, JPEG, or MP3 files on a disc. Playing Audio CD (Programmed Playback) Playing JPEG Files 1. Place an audio CD disc on the tray. The disc will begin playback automatically. 1. Place the disc (with JPEG files) on the tray. 2. -
Page 31: Dvd Menu And Edit Menu
Editing (For DVD Disc Only) Protecting a Title Before starting to edit This section explains the basic editing functions offered by this 1. On the Title Edit menu, press [ ] [ ] to select VCR/DVD recorder. Please finish all the editings before finalizing “Protection”... -
Page 32: Easy Guider
Easy Guider When you select “Record Disc” and insert a non-recordable disc, Playback follow the on-screen instructions to change to a recordable disc. 1. Press [ GUIDER] to display the Easy Guider menu. Press [ ] [ ] to select “Playback” and press [ENTER]. -
Page 33: Copy
Easy Guider Copy Note: 1. Press [ GUIDER] to display the “Easy Guider” You may only use this DVD recorder to reproduce or copy menu. Press [ ] [ ] to select “Copy” and press materials for which you own the copyright; or have obtained [ENTER]. -
Page 34: Finalize
Easy Guider 3. When completed, select “EXIT” and press [ENTER] to exit the erase menu. Note: When finished, you can select “EXIT” and press [ENTER] or press the [ GUIDER] button again to exit the “Easy Guider” menu during the finalization process. Note: You can select “EXIT”... -
Page 35: Gui Operation
GUI Operation Changing system settings Clock Change the settings to suit your preferences and to set up the unit in the environment in which it is being used. Clock Format Set the date/time display format Auto Clock Enable the clock to be set automatically or manually. Date Set the date Time... -
Page 36: Firmware Update
Firmware Update Record As the firmware is continuously refined for greater stability and compatibility of the player, user may chose to update the DVD Quality latest firmware form http://www.liteonit.com/DC/english/ Set the default quality of DVD recording. (1hr) (2hrs) (Default) download.htm (3hrs) (4hrs) SLP (6hrs) -
Page 37: Glossary
Glossary DVD+RW 480i/480p DVD+RW is a recordable and rewritable disc. DVD+RW use a Indicates the number of scanning lines and scanning format of an recording format that is comparable to a DVD-Video format. image signal. 480i indicates 480 scanning lines with interlace format, and 480p indicates 480 scanning lines with progressive format. -
Page 38: Specifications
Specifications AUDIO RECORDING FORMAT MEDIA TYPES SUPPORTED (Read Only) DVD: Dolby Digital 2-channel DVD-R/-RW, DVD+R/+RW, DVD-ROM, CD-R/-RW, CD-ROM, VHS: FM audio VHS tape AUDIO FORMAT SUPPORTED - PLAYBACK CONTENT FORMAT SUPPORTED Analog output 2-channel 1) DVD-Video Digital output coaxial 2) DVD+VR (DVD+VR format is compatible with DVD-Video in most cases) Format supported LPCM/Dolby Digital/MP3... -
Page 39: Troubleshooting
Troubleshooting No playback on DVD recorder. Picture --> There are no recordings on the disc. Check the disc first. --> A disc not supported by this unit is inserted. Check the playable The image from this unit does not appear on the disc type list. - Page 40 Customer Call Center: 886-3-578-7722#2604/2605 Service e-mail: dc_support@liteonit.com USA: LITE-ON (USA) International Inc. 42000 Christy Street, Fremont, CA 94538 Tel: 1-510-687-1800 Fax: 1-510-687-1900 Customer Call Center: 1-888-8-LITEON (1-888-854-8366) 1-866-269-5133 (French) Service e-mail: dc_support@liteonit.com Europe: LITE-ON Information Technology (Europe) B.V. Meerenakkerplein 16, 5652 BJ EINDHOVEN,...
Need help?
Do you have a question about the LVC-9016G and is the answer not in the manual?
Questions and answers