Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
REV 14f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 68857
ITEM 69436
Advertisement
Table of Contents
Related Manuals for Drill Master 120 Volt Variable Speed Jigsaw
Summary of Contents for Drill Master 120 Volt Variable Speed Jigsaw
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
Table of Contents Safety ............2 Maintenance ..........12 Specifications ..........8 Parts List and Diagram ......14 Setup ............8 Warranty ............ 16 Operation ............ 9 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Electrical Safety
Electrical safety 1. Power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord for Never modify the plug in any way. carrying, pulling or unplugging the power tool. Do not use any adapter plugs with grounded Keep cord away from heat, oil, sharp edges power tools. -
Page 4: Power Tool Use And Care
These carry important safety information. pacemaker interference or pacemaker failure. In If unreadable or missing, contact addition, people with pacemakers should: Harbor Freight Tools for a replacement. • Avoid operating alone. 4. Avoid unintentional starting. • Do not use with power switch locked on. -
Page 5: Vibration Safety
Jigsaw Safety Warnings (cont.) 10. WARNING: Some dust created by power sanding, 11. WARNING: The cord of this product contains sawing, grinding, drilling, and other construction lead, a chemical known to the State of California activities, contains chemicals known to the State to cause cancer, and birth defects or other of California to cause cancer and birth defects or reproductive harm. - Page 6 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
-
Page 7: Extension Cords
Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it. -
Page 8: Specifications
Specifications Electrical Rating 120VAC / 60Hz / 3.2A Cutting Speed 0-3000 SPM Stroke Length 3/4" Baseplate Tilt 0-45° left or right U-shank Blades Blade Type (sold separately) 4005006 Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. -
Page 9: Operation
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Disengage the Lock ON Button, release the Trigger and unplug the tool from its electrical outlet before adjusting tool or installing accessories. -
Page 10: Work Piece And Work Area Set Up
Work Piece and Work Area Set Up 1. Designate a work area that is clean and well- 3. Secure loose work pieces using a vise or clamps lit. The work area must not allow access by (not included) to prevent movement while working. children or pets to prevent distraction and injury. -
Page 11: General Operating Instructions
General Operating Instructions Basic Operation 1. Make all necessary adjustments to the Jigsaw. 7. Do not force the Jigsaw to cut faster than it is designed to cut. Feed the Saw 2. Make sure that all guards are in place in Blade gradually into the workpiece. -
Page 12: Maintenance
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Disengage the Lock ON Button, release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. -
Page 13: Troubleshooting
Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. -
Page 14: Parts List And Diagram
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. -
Page 15: Assembly Diagram
Assembly Diagram Item 69436 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 120 Volt Variable Speed Jigsaw and is the answer not in the manual?
Questions and answers