Table of Contents
Advertisement
Service manual DW90
Technical data
Height:
Width:
Depth:
Weight (freestanding):
Weight (integrated):
Water pressure:
Connection:
Max. rated power:
* According to EN 50242 standard.
** See type plate.
8
823-870 mm (32-1/4" to 35-1/2") = for 820 mm machines (XL)
863-910 mm (33-3/4" to 36") = for 860 mm machines (XXL)
596 mm (23-5/8")
550 mm (22")
56 kg/59 kg (124 lbs/130 lbs) with water softener (XL)
57 kg/60 kg (126 lbs/132 lbs) with water softener (XXL)
49 kg/52 kg (108 lbs/115 lbs) with water softener (XL)
50 kg/53 kg (110 lbs/117 lbs) with water softener (XXL)
0.03–1.0 MPa (0.3–10 kp/cm
1-phase, 230 V, 50/60 Hz, (10 A/16 A)**
1-phase, 120 V, 60 Hz, (15 A)**
3-phase, 400 V, 50/60 Hz, (10 A) **
1700 W (230 V)**
1300 W (120 V)**
2200 W (400 V)**
) (4.2-140 psi)
2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DW90 Series and is the answer not in the manual?
Questions and answers
sympol appearing on the controll panel and can't do anything on there?
The control panel of the Asko DW90 Series includes various symbols, such as LED indicators and fault codes. The Status Light™ at the bottom edge of the door communicates the machine's status:
- Blue Light: The program has started, but dishes can still be loaded (no detergent present).
- Red Light (Constant): Additional loading not recommended (detergent present).
- Flashing Red Light: Indicates a fault, such as water inlet issues, leaking valve, or overflow.
To resolve a flashing red light:
1. Check for water inlet faults, leaks, or overflow.
2. Inspect the overflow guard, which may have been activated by water on the bottom plate.
3. Open the service menu:
- Check the machine settings.
- Run a test cycle.
- Note any fault codes.
4. If no fault is found, conduct general troubleshooting using service manuals and wiring diagrams.
5. If the issue persists, contact technical support for further assistance.
This answer is automatically generated