Catalytic Converters; Seats - Yamaha YZFR6A Owner's Manual

Catalytic converters

This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
G
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
G
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
G Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
G
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13445
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10862
pairable damage to the catalytic
converter.
ECA10701

Seats

Rider seat
To remove the rider seat
Pull back the rear of the rider seat as
shown, remove the bolts, and then pull
the seat off.
1. Bolt
To install the rider seat
Insert the projection on the front of the
rider seat into the seat holder as
shown, place the seat in the original po-
sition, and then install the bolts.
4-16
EAU39032
4