Display Fault Codes - CDA ci261 Manual For Installation, Use And Maintenance

Display Fault Codes

Fault Codes
E01
E03
E04
Possible Fault
The machine
door is left
open.
Pump fault or
pump filter
clogged.
Excessive
amount of
water in the
machine.
Water cut off or
low water
pressure.
Pump faulty or
clogged
What To Do
Close the machine door. If
your machine persists to
indicate a fault turn it off,
unplug it and contact CDA
Customer Care.
Clean the pump filter.
If the problem persists
contact CDA Customer Care.
The machine will empty itself.
After this, turn off the water &
electricity, contact CDA
Customer Care.
Check tap is turned on.
Check mains water is not cut-
off.
Check mains water pressure
is not low.
Check water inlet hose is not
twisted or clogged.
Clean water inlet filters,
If the problem persists,
unplug your machine, turn off
the tap and contact CDA
Customer Care.
Check the pump filter is not
clogged.
Check water inlet hose is not
twisted or clogged.
If the problem persists,
unplug your machine, turn off
the tap and contact CDA
Customer Care.
16