Spektrum DX3C Instruction Manual
3-channel 2.4ghz dsm radio system
Hide thumbs
Also See for DX3C:
- Manuel d'utilisation (18 pages) ,
- Bedienungsanleitung (18 pages) ,
- Quick start manual (2 pages)
Related Manuals for Spektrum DX3C
Summary of Contents for Spektrum DX3C
- Page 1 3-Channel 2.4GHz DSM Radio System Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di istruzioni...
-
Page 2: General Notes
If you are a newcomer to radio controlled models, please seek help from an experienced modeler or your local hobby shop. FRANCE RF SETTING: The DX3C has a France RF setting that complies with French regulations. Always use the France power set- ting when operating the transmitter outdoors in France. -
Page 3: Table Of Contents
Thank you for purchasing the Spektrum DX3C transmitter. With advanced programming, refined ergonomics, a sleek style and an SD card slot for enhancements, the DX3C is perfect for sport drivers. TABLE OF CONTENTS System Features ............3 Travel ..............8 Table of Contents ............3 Bind Transmitter to Receiver ......9... -
Page 4: Identifying Controls And Switches
CAUTION: Do not remove transmitter batteries while model is powered on or while operating a model or loss of model control, damage or injury can result. Spektrum DX3C • Radio Instruction Manual... -
Page 5: Rubber Grip
RECEIVER INFORMATION The DX3C features DSM technology and is compatible with Spektrum DSM, DSM2, and Marine surface receivers. See www.spektrumrc.com for all compatible receivers. Receiver Connection and Installation Install the receiver using double-stick tape in the typical electric-powered model on the side opposite from the ESC. -
Page 6: Modelmatch
ModelMatch The DX3C features ModelMatch technology that prevents operating a model using the wrong model memory. During the binding process, the receiver stores code that is assigned to the specific model that is currently selected in the transmitter. For example: if the model that is selected in the transmitter is model #3, when a receiver is bound to that transmitter, the receiver will only operate when model #3 is selected. -
Page 7: Programming Guide
D A small bar shows relative position of highlighted screen name in the List. List List List Select Sub-Trim System Reverse Timer Copy Travel Name Reset Expo Switch Mixing Bind System System Steer Mix Spektrum DX3C • Radio Instruction Manual... -
Page 8: Select
Channel Bottom the model’s response to changed Travel settings. Raise Steering L (left) R (right) vehicle so vehicle does not move on tires during testing. Throttle B (brake) F (forward) H (high) L (low) Spektrum DX3C • Radio Instruction Manual... -
Page 9: Bind Transmitter To Receiver
NOTICE: If the bind plug is not removed from the receiver, C Active model number. the receiver will enter bind mode the next time the receiver is D A dark box around the text shows binding action. powered on. Spektrum DX3C • Radio Instruction Manual... -
Page 10: Sub-Trim
Main Screen when an model memory is active. Model 1: Note: You can only change a model name when the model memory is active. NAME-01 A Marker showing selected character. B Model Name (10 character spaces available). C Active model memory. Spektrum DX3C • Radio Instruction Manual... -
Page 11: Switch
‘on the fly’. You can adjust the rate between 0–100%. Factory default setting is 100%. The rate cannot be greater than 100% and will never exceed the amount of steering travel set in the Travel Screen. A Steering rate B Screen title Spektrum DX3C • Radio Instruction Manual... -
Page 12: Copy
F Box shows selected text G Choosing Yes saves active model settings to the selected model memory CAUTION: Model information saved in a memory is erased and overwritten by active model settings using this Copy function. Spektrum DX3C • Radio Instruction Manual... -
Page 13: Reset
NOTICE: Before driving a model, always do a check of the model’s response to mix settings. Raise vehicle so vehicle does not move on tires during testing. Spektrum DX3C • Radio Instruction Manual... -
Page 14: Steer Mix
I F/R enables switch assignment for the programmed steering mix rates 1 and 2. J The assigned switch (A, B, C, D or E) lets a driver enable front/rear steering mix rate 1 or 2. Spektrum DX3C • Radio Instruction Manual... -
Page 15: Troubleshooting Guide
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may When operating your Spektrum transmitter, please be sure to not cause harmful interference, and (2) this device must accept... -
Page 16: Warranty And Repair Policy
Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for inspection or repair, you are agreeing to Horizon’s Terms and Conditions found on our website under the Repairs tab. Spektrum DX3C • Radio Instruction Manual... -
Page 17: Warranty And Service Contact Information
EN 60950-1:2006+A11 Signed for and on behalf of: Horizon Hobby, Inc. Steven A. Hall Champaign, IL USA Vice President March 23, 2011 International Operations and Risk Management Horizon Hobby, Inc. Spektrum DX3C • Radio Instruction Manual... - Page 18 © 2011 Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other marks and logos are trademarks or registered trademarks of Horizon Hobby, Inc. US 7,391,320. Other patents pending. www.spektrum-rc.com 2/11 28844 SPM3300...
Need help?
Do you have a question about the DX3C and is the answer not in the manual?
Questions and answers
What is the minimum voltage for operation
The minimum voltage for operation of the Spektrum DX3C is 4.0 volts.
This answer is automatically generated