Table of Contents
Advertisement
Italiano, 1
Espanol, 33
Portuges, 43
REFRIGERATOR/FREEZER COMBINATION
Contents
Positioning and connection
Français, 23
Using the refrigerator to its full potential
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
Respecting and conserving the environment
Advertisement
Table of Contents
Related Manuals for Indesit BAAN 10
Summary of Contents for Indesit BAAN 10
- Page 1 Positioning and connection Reversible doors Overall view Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance...
- Page 2 1. Install the appliance on a level and rigid floor. 2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet. After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains.
- Page 3 WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else. Fitting a new plug IMPORTANT WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown...
- Page 4 The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. Knob ( see Maintenance ) SHELVES• FRUIT and ice tray compartment ice tray compartment Levelling FEET...
- Page 5 It is recognizable due to the presence of the mechanism on the top part of the refrigerator compartment ( see diagram ). The Aircooler maintains a constant fridge temperature to keep food fresher for longer and will...
- Page 6 3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting.
- Page 7 (for example: Kg/24h: 4) Do not open the door during freezing. If there is a power cut or malfunction, do not open the freezer door.
- Page 8 • The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly. • If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.
- Page 9 If circulation is impeded, the compressor will work continuously. • Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
- Page 10 • The TEMPERATURE ADJUSTMENT knob is not in the correct position. • The food is in contact with the back inside wall of the refrigerator. • The door is not closed properly or is continuously opened. • The outside ambient temperature is very high.
- Page 11 Centre • type of malfunction • appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment. 93139180000 S/N 704211801 RG 2330 Mod. Cod. 220 - 240 V-...
Need help?
Do you have a question about the BAAN 10 and is the answer not in the manual?
Questions and answers