Zboost Base Unit Light Indicators - zBoost Trio ZB575 User Manual

During Initial Power Up
Light Mode Status
Cycle RED, System is
GREEN, powering up.
ORANGE Please allow up
to 30 seconds.
Flashing BASE UNIT will
GREEN flash GREEN
once for every
2 dB less than
optimal system
gain. Three
flashes or less
indicates the
system will still
operate properly.
After Initial Power Up
Light Mode Status
SOLID zBoost is ready.
GREEN
Flashing zBoost is in use. N/A
GREEN
SOLID EXTERNAL
ORANGE ANTENNA
and INDOOR
ANTENNA
are too close
together.
SOLID RED Signal from the
carrier's cell
tower is too
strong for the
BASE UNIT to
operate properly.
Flashing Excessive
RED electronic noise
in the system –
the BASE UNIT
will not operate.
zBoost TRIO ZB575 Manual
®

zBoost Base Unit Light Indicators

Solution
N/A
1. Unplug the BASE UNIT power supply.
2. Relocate the EXTERNAL ANTENNA to pick up the
strongest signal from your wireless carrier.
3. Move the EXTERNAL ANTENNA as far away from the
INDOOR ANTENNA as possible, with at least 15 ft. of
vertical separation (height difference).
4. Plug the BASE UNIT power supply back in.
5. Wait 30 secs. for the BASE UNIT to power cycle on.
Solution
N/A
1. Unplug the BASE UNIT power supply.
2. Move the EXTERNAL ANTENNA as far away from the
INDOOR ANTENNA as possible, with at least 15 ft. of
vertical separation (height difference).
3. Plug the BASE UNIT power supply back in.
4. Wait 30 secs. for the BASE UNIT to power cycle on.
1. Unplug the BASE UNIT power supply.
2. Relocate the EXTERNAL ANTENNA to another spot.
3. If you have a directional antenna re-aim it to reduce
carrier signal strength.
4. Plug the BASE UNIT power supply back in.
5. Wait 30 secs. for the BASE UNIT to power cycle on.
^ Refer to Solution #2
10