Warning and indicator lamps
1
Visual indicators which inform the driver of the occurrence of a malfunction (warn-
ing lamp) or of the operation of a system (operation or deactivation indicator lamp).
When the ignition is switched on
Certain warning lamps come on for a few seconds when the ignition is switched on.
When the engine is started, these warning lamps should go off.
If they remain on, before moving off, refer to the information on the warning lamp
in question.
Associated warnings
The illumination, fi xed or fl ashing, of certain warning lamps may be accompanied
by an audible signal and the display of a message.
Warning lamps
When the engine is running or the vehicle is being driven, the illumination of one of the fol-
lowing warning lamps indicates a malfunction which requires action on the part of the driver.
The warning comes on in the instrument panel.
Warning lamp
STOP
Maximum
coolant
temperature
32
M O N I T O R I N G
is on
fi xed, alone
or associated
Illumination of this warning
with another
lamp is associated with a
warning lamp,
serious fault with the braking
accompanied by
system, power steering,
an audible signal
engine lubrication system or
and a message in
cooling system.
the screen.
The temperature of the
fi xed red.
cooling system is too high.
Cause
Stop as soon as it is safe to do so as
there is a risk that the engine will cut out
while driving.
Park, switch off the ignition and contact a
CITROËN dealer or a qualifi ed workshop.
Stop as soon as it is safe to do so.
Wait until the engine has cooled down
before topping up the level, if necessary.
If the problem persists, contact a
CITROËN dealer or qualifi ed workshop.
If your vehicle has a screen, a
warning lamp coming on is al-
ways accompanied by the dis-
play of an additional message,
to assist you in identifying the
problem.
If you encounter any problems,
do not hesitate to contact a
CITROËN dealer or a qualifi ed
workshop.
Action/Observations
Need help?
Do you have a question about the C4 and is the answer not in the manual?
Questions and answers
when does the cam belt need replacing