Download
Share
Print this page
JK Audio BlueDriver-F3 User Manual
  1. Manuals
  2. Brands
  3. JK Audio Manuals
  4. Accessories
  5. BlueDriver-F3
  6. User manual

JK Audio BlueDriver-F3 User Manual

Wireless audio interface
Hide thumbs Also See for BlueDriver-F3:

Advertisement

Quick Links

Download this manual See also: User Manual
BlueDriver-F3™
Wireless Audio Interface
User Guide
JK Audio

Advertisement

loading
Need help?

Need help?

Do you have a question about the BlueDriver-F3 and is the answer not in the manual?

Questions and answers

Related Manuals for JK Audio BlueDriver-F3

Summary of Contents for JK Audio BlueDriver-F3

  • Page 1 BlueDriver-F3™ Wireless Audio Interface User Guide JK Audio...
  • Page 2 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license. Other trademarks and trade names are those of their respective owners. ...
  • Page 3 Please see page 9 for more information. This device can be used with the power cable connected if desired. Before you turn the BlueDriver-F3 on, be sure to set the Headset/Phone switch to the correct position. If you change that switch while the unit is on, you will need to power the unit off, then power the unit back on before the change takes effect.

  • Page 4: Bluetooth Wireless Technology

    On your phone, find and select the option to set up a connection. Press and hold the brown Connect button on BlueDriver-F3 for at least 5 seconds. After you release the Connect button, the blue LED should flash rapidly if BlueDriver-F3 is in Pairing Mode.
  • Page 5 Bluetooth Wireless Technology When bonding is complete, the blue LED will flash at a rate of 1 sec on, 2 sec off. Once BlueDriver-F3 has been added to your cell phone, subsequent connections can be made more quickly from Idle Mode.
  • Page 6 Bluetooth Wireless Technology Bluetooth LED pattern to initiate Bonding Initialize Idle Mode Pairing Mode 200 ms off, 100 ms off, 200 ms on 100 ms on Blue LED Hold Connect button in > 5 sec to reach Pairing Mode the first time a new device is connected, >...
  • Page 7 Pairing Mode. Following manufacturer’s instructions, set your headset to Pairing Mode. Hold the Connect button on BlueDriver-F3 in for at least 5 seconds to activate Pairing Mode. BlueDriver-F3 will automatically pair to the first device it finds that is in Pairing Mode. The next time you use the same headset, you can connect from Idle Mode instead of pairing mode.
  • Page 8 To turn the power off, press and hold the Connect button for a full five seconds. If left unused in Idle Mode or if a live call is disconnected, the BlueDriver-F3 will automati- cally disconnect Bluetooth in two minutes and power will be turned off.
  • Page 9 This loss of capacity is irreversible. To get the most from your BlueDriver-F3, the battery should not be allowed to fully discharge. If this unit is not in use, the battery should be recharged at least every 90 days.
  • Page 10 Many cell phones and headsets have a maximum range of 10 feet. Why can’t I get the BlueDriver-F3 to accept a password and pair with my new phone? If this is the first time you have bonded to this cell...
  • Page 11 How long will the charge on the battery last? Based on tests with BlueDriver-F3 about 1 meter from a Bluetooth device, the battery should last for about 10 hours under normal use. As an indicator...

  • Page 12: Specifications

    Specifications Input: 3-pin female XLR 1 k ohms 15 mV RMS, (-34 dBu) nom. Output: Line Out: 1/8” (3.5mm) Stereo - L=microphone R= Bluetooth return 1.1 k ohms 15 mV RMS, (-34 dBu) nom. Bluetooth: Standard: Bluetooth 2.0 Distance: 33 feet (10 meters) Profiles: HF - full duplex voice 300 Hz - 3400 Hz...
  • Page 13 When this device is no longer in service, please dispose of it per regulations in your area for Lithium-Ion batteries. Note: While BlueDriver-F3 was designed to be very rugged and durable, it is not waterproof and care should be taken to keep the unit dry.

  • Page 14: Declaration Of Conformity

    Declaration of Conformity BlueDriver-F3 conforms to the following Product Specifications: Safety: AS/NZS 60950.1:2003 CAN/CSA-C22.2 No. 60950-01-03 UL Standard 60950-01 1st edition Nemko-CCL File Number NA201010004 ESD: EN 55024:1998 EN 61000-3-2 EN 61000-3-3 Emissions: EN 55022:2006 AS/NZS CISPR 22 (2002) FCC Part 15, Subpart B ICES-003 Bluetooth Radio: EN 300.328...
  • Page 15 FCC-B Part 15 Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 16: Warranty

    Warranty The model BlueDriver-F3 is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the BlueDriver-F3 needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground.