Software Upgrade By Usb Stick Memory; Software Upgrade By Serial (Rs-232 Cable) - SuperMax FT 9950 Power Plus User Manual

6 Software Upgrade by USB stick memory

6. Software Upgrade by USB stick memory
1. Download a new soft-ware from website.
2. Copy the soft-ware file to your USB memory
stick.
3. Insert the USB memory stick into the USB port.
4. Go to Manager menu and USB manager.
5. Press the Green button on RCU for sorting S/W 5 Press the Green b tton on RCU for sorting S/W
6. Select S/W then Press OK button on RCU.
Note:
Your USB memory must be formatted in the
FAT or FAT32 file system.
Otherwise, the digital receiver can not recognize
your USB memory.
7. Software Upgrade by Serial (RS 232 Cable)

7 Software Upgrade by Serial (RS-232 Cable)

You may upgrade S/W by Serial mode (RS-232 Cable) as following way.
1. On your PC, press 'Start' → 'Hyper terminal'
2. Bit rate: 115200
3. Data bit: 8
4. Parity: None
5. Stop Bit: 1 5 Stop Bit: 1
6. Flow control: None
7. Run Hyper terminal.
8. Turn on receiver while press 'Volume up' key on front panel.
9. Display 'ccc' on Hyper terminal, then select Transfer → sending file → select S/W
10. Protocol type set 'Ymodem'
11. Press Sending.
10