LENCO XEMIO-760 BT User Manual page 8

Before pairing, please make sure your Bluetooth Receiver Device
supports Bluetooth A2DP profile.
Keep the device in 1 meter of your Bluetooth receiver device.
Switch on your Bluetooth receiver device and enable it to searching /
pairing mode.
a. Search Device
Choose "Search Device" to enter into the Bluetooth searching mode by
using /
starting, for approximate 10 ~ 20 seconds, a device(s) name list will
appear to choose for pairing.
Choose the device's name which you want to pair then choose
"Pair/Connect" by using
seconds both device should be paired and the first song in music list will
playing automatically from you Bluetooth receiver device. And,
The screen is switch to "BT Now Playing" interface and a Bluetooth icon
" "is displaying at the information bar, the Bluetooth is in transmitting.
Bluetooth Transmission is On
To search for new Bluetooth Device;
Before you search for new device, please disconnect the current paired
device. For better result, turn the paired Bluetooth receiver to power off.
Choose "Search Device" the device searching mode will start again for
new device(s) name list to choose again;
Choose new found and wanted Bluetooth receiver device for pairing.
b. Device's List
Choose "Device's List" to enter into the paired device list, you can
and buttons on player, the device searching mode is
/ and
8
buttons, wait for few