Advertisement
User Manual
Color Door Camera DRC-40K
Thank you for purchasing COMMAX products.
Please carefully read this User's Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Advertisement
Related Manuals for Commax DRC-40K
Summary of Contents for Commax DRC-40K
-
Page 1: User Manual
User Manual Color Door Camera DRC-40K Thank you for purchasing COMMAX products. Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. The company is not responsible for any safety accidents caused by abnormal operation of the product. - Page 2 6. Specification Model No. DRC-40K Rated Voltage / Power Consumption DC 12V (Supplied from monitor) 4 wires to a monitor (polarity) Wiring (Main Unit / Door Release) 2 wires to the door release (non-polarity) Sensor Type CMOS IMAGE SENSOR NTSC or PAL STANDARD.
-
Page 3: Table Of Contents
Contents 1. Introdution ................2 2. Important Safeguard............3 3. Overview ................4 4. Package contents...............6 5. Wiring and Installation ............7 6. Specification ..............9... -
Page 4: Introdution
The model number is located on the bottom and record the serial number in the space provided below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product. Model No. -
Page 5: Important Safeguard
2. Important Safeguards Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service per- sonnel under the following conditions: when the power is damaged. if liquid has been spilled or objects have fallen into the unit if the equipment has been exposed to rain or water. -
Page 6: Overview
3. Overview... - Page 7 ① White LED & Illumination Sensor : Offer clear image at night ② Microphone : Deliver voice signal from a visitor ③ Camera Lens : Transfer image * Make sure the lens is always kept clean ④ Speaker : Deliver voice signal to a visitor ⑤...
-
Page 8: Package Contents
4. Package contents... -
Page 9: Wiring And Installation
5. Wiring and Installation 1. Match the fix the whole in the wall and the fixing bracket [FIG.1] 2. Match and connect monitor line as shown below [FIG.2] (#1: Audio, #2: GND, #3: DC12V, #4: Video) 3. Adjust camera location on the wall by checking the image on monitor screen and fix its location 4. - Page 10 ▶ Position of camera ▶ Installation place Do not install the product where direct lays of the sun reach the camera lens. Adjust the position by using the angle adjustor (in the back). Install a separate lighting at night for better picture quality. ㅌ...
-
Page 11: Specification
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com Printed In Korea / 2013.02.105...
Need help?
Do you have a question about the DRC-40K and is the answer not in the manual?
Questions and answers
Hi, i need to fix a pushbutton near by the gate for manual opening so how can i connect the pushbutton
The user manual for the Commax DRC-40K mentions a "Door Release Connection Line" that allows door control. To connect a pushbutton for manual opening, follow these steps:
1. Identify the Door Release Connection Line on the DRC-40K.
2. Connect one terminal of the pushbutton to the Door Release Connection Line.
3. Connect the other terminal of the pushbutton to the appropriate power or control circuit, depending on your door release system.
4. Ensure all connections are secure and test the pushbutton to verify proper operation.
Always follow safety guidelines and refer servicing to qualified personnel if needed.
This answer is automatically generated
@Mr. Anderson thank you very much..