GE GCG1500BB Technical Service Manual page 20

3. Connect power and check operation of ram
before installing top cover.
Ram Slides
A ram slide is located on each vertical flange of the
ram (2 on each side). Each vertical flange has 2 tabs
that hold each ram slide. Each ram slide is inserted
under the tabs.
Slide
Power Screw Nut
Power Screw Nut
A power screw nut is attached to the bottom of
each side of the ram. It is necessary to use a small
flat-blade screwdriver to remove the retaining clip
and pin that hold each power screw nut to the ram.
Caution: Discard the removed retaining clips and
pins. Use the new retaining clips and pins included
with the replacement power screw nut assembly.
Tab
– 20 –
Clip
Pin
Power Screw Nut