Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VADDIO Extreme USB 2.0 Extender TX
Summary of Contents for VADDIO Extreme USB 2.0 Extender TX
- Page 1 Vaddio™ Extreme USB 2.0 Extenders Part Numbers: 999-1005-022 - North America 999-1005-122 - International Extreme USB 2.0 Extender TX Extreme USB 2.0 Extender RX © 2013 Vaddio - All Rights Reserved. Extreme USB 2.0 Extenders, Document Number 342-0468 Rev D...
-
Page 2: Table Of Contents
Extreme USB 2.0 Extenders Table of Contents Overview ..................................3 Intended Use: ................................. 3 Important Safeguards: ............................3 Save These Instructions: ............................3 Unpacking .................................. 4 Extreme USB Extenders (North America) 999-1005-022 ..................4 Extreme USB Extenders (International) 999-1005-122 ..................4 Requirements: ................................ -
Page 3: Overview
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions. Do not connect Ethernet or Power over Ethernet (PoE) cables directly to the RJ-45 ports on the device as damage may result. -
Page 4: Unpacking
Extreme USB 2.0 Extenders NPACKING All the components within the shipping box are packaged as described in the sections below. Carefully remove all parts included in the packaging. Extreme USB Extenders (North America) 999-1005-022 Unpack and identify the following parts ... -
Page 5: Anatomy Of The Extreme Usb 2.0 Extenders
Orange when the TX unit detects an overcurrent condition and the attached USB device attempts to draw more than the 500mA current. 3) Power LED (Vaddio Blue): LED turns blue when power is supplied and goes OFF when no power is available. -
Page 6: Image: Front Panel Of Extreme Usb 2.0 Rx Unit
➌ ➊ ➍ 1) Power LED (Vaddio Blue): LED turns blue when power is supplied and goes OFF when no power is available. 2) Link LED (Green): Indicates a valid Extreme USB link is established between the RX and TX over Cat-5e cabling. -
Page 7: Installation Instructions
Extreme USB 2.0 Extenders NSTALLATION NSTRUCTIONS Step 1: Before installing the Extreme USB 2.0 Extenders: A. Determine where the computer is going to be located. B. Determine the location of the USB device or USB camera. To ensure proper operation it is recommended that only Cat-5e or better (Unshielded Twisted Pair - UTP) cabling is used to connect between the RX unit to the TX unit. -
Page 8: Diagram: Basic Connectivity Of The Extreme Usb 2.0 Extenders
Diagram: Basic Connectivity of the Extreme USB 2.0 Extenders Cat-5e Vaddio HD-USB PTZ Camera with local power for the camera and the Extreme USB 2.0 TX unit are shown. A cable run from the TX extender (remote side) to the RX extender located at the Host PC to extend USB 2.0 video up to 100m (328.1’). -
Page 9: Troubleshooting
Extreme USB 2.0 Extenders ROUBLESHOOTING The following table provides troubleshooting tips. The topics are arranged in the order in which they should be executed in most situations. If you are unable to resolve the problem after following these instructions, please contact technical support for further assistance. - Page 10 Extreme USB 2.0 Extenders Troubleshooting (continued) Problem Probable Cause Solution Possibilities 1) Recover/Resume the operating system The Extreme USB The TX unit is in suspend/standby from standby mode (see the PC’s Extenders were mode. The PC operating system operating system documentation). working, but then the may have put the Extreme USB 2.0 Host LED on the TX...
- Page 11 Extreme USB 2.0 Extenders Troubleshooting (continued) Problem Probable Cause Solution Possibilities USB device is attached A USB device must have the Install the required USB device driver on the to TX unit’s USB port but appropriate driver installed on the computer operating system prior to attaching TX device LED is off.
-
Page 12: Specifications
Extreme USB 2.0 Extenders PECIFICATIONS Extreme USB 2.0 Extenders Part Numbers 999-1005-022 North America 999-1005-122 International Range 100m (330ft) over Cat-5e (or better) cable USB device support High-speed devices (480 Mb/s) (USB 2.0) Full speed devices (12 Mb/s) (USB 2.0 &... -
Page 13: Compliance And Ce Declaration Of Conformity
Extreme USB 2.0 Extenders CE D OMPLIANCE AND ECLARATION OF ONFORMITY Extreme USB 2.0 Extenders Compliance testing was performed to the following regulations: FCC Part 15, Subpart B Class B ICES-003 ISSUE 4, 2004 Class B EN55022 A1 2007 Class B ... -
Page 14: Warranty Information
Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. - Page 15 Extreme USB 2.0 Extenders Inside Back Cover - Blank Extreme USB 2.0 Extenders - Document Number 342-0468 Rev D Page 15 of 16...
- Page 16 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are Extreme USB 2.0 Extenders - Document Number 342-0468 Rev D Page 16 of 16 subject to change without notice.
Need help?
Do you have a question about the Extreme USB 2.0 Extender TX and is the answer not in the manual?
Questions and answers