Euroace Control Panel; Quick Start Guide - Garrett Euro ACE Owner's Manual

EuroACE CONTROL PANEL

target ID Legend
indicates metal types.
Sensitivity
Mode
Setting
Indicator
On / OFF
Power
MODe
SenSItIvIty
Pushbutton
Pushbutton
selects detection
increases or
mode (i.e.
decreases
discrimination
sensitivity.
pattern).
4
Garrett Metal Detectors
Lower Scale
indicates notch
discrimination pattern.
target ID Cursor
indicates probable Coin Depth
target identity.
Indicator
indicates depth of
coin-sized target.
PInPOInt
Battery Level
Pushbutton
Indicator
allows static detection
to precisely locate the
object.
DISCRIM and Accept/
Reject Pushbuttons
Use DISCRIM (+) or (-) to select a
cursor. Then use (/X) button to set
its discrimination on or off.

QUICK START GUIDE

1. Install batteries.
The EuroACE operates with four (4) AA batteries which are
already installed by Garrett.
2. Power ON.
Press and release the ON / OFF Power button. The EuroACE
powers on in the last mode used, automatically adjusts for
ground minerals and is ready to search.
mode is Coins.)
3. Select Mode.
Use the Mode Pushbutton to select a different detection
mode, when desired.
4. Adjust settings.
Adjust Sensitivity or Discrimination settings, if desired.
5. Begin scanning.
Lower the searchcoil to 2 to 3 cm above the ground and
scan the coil left and right at approximately 1m/second.
(Factory default
5
EuroACE™