Getting Started; Configuring Display Settings; Launching Mixvibes Vfx; Software Activation - MIXVIBES VFX CONTROL User Manual

4 Getting started

4.1 Configuring display settings
To configure display settings:
1 Right-click on your Desktop and select Screen resolution in Windows® Vista/7 (Properties then Display settings
in Windows® XP).
2 If you wish to connect a second monitor, plug the second monitor to your computer's secondary output (please refer to
the owner's manual for details). Right-click on the second monitor then select Attached.
3 Choose the screen resolution then click OK to confirm.

4.2 Launching MIXVIBES VFX

To launch MIXVIBES VFX, go to [Start > All Programs > MixVibesVFX] and click on MixVibes VFX or double-click on the MIXVIBES
VFX shortcut on your desktop.

4.3 Software activation

Before you use MIXVIBES VFX, you need to register and activate the software.

4.4 Install Wizard

The install wizard launches automatically when running MIXVIBES VFX for the first time. The install wizard can be launched
manually in [Options/Install Wizard].
4.4.1 Auto-configuration
Auto-configuration allows MIXVIBES to:
automatically configure MIXVIBES audio interfaces outputs.
enable MIXVIBES MIDI controllers.
choose the best skin according to your resolution and your MIDI setup.
If you use MIXVIBES VFX CONTROL in stand alone setup, it is advisable to choose the auto-configuration.
display_setting.pdf display_setting.pdf 21/09/2009 21/09/2009
Display settings
C
M
J
CM
MJ
CJ
C
CMJ
N
M
install_wizard1.pdf 09/02/2010 12:31:36
Y
CM
MY
CY
CMY
Auto-configuration
K
10 /
50
17:07:05 17:07:05
vibe-watermark-bright.pdf