Parts 2 Small Ramps Bridge 6 Curved Tracks 5 Straight Tracks 2 Cross Tracks 2 Bridge Ramps G. 2 Turn Off Tracks H. Gantry Depot Depot Base Coal Chute Coal Chute Frame M. Coal Mine Building Coal Mine Arch O. 2 Boulders Pipe Works Q.
Battery 1.5V x 6 “AAA” (LR03) Information SHOWN ACTUAL SIZE We recommend the use of alkaline batteries for longer battery life Battery Installation Train Engine • Locate the battery compartment on the back of the train engine • Loosen the screws in the battery compartment door with a Phillips screwdriver.
Assembly COAL MINE BUILDING • “Snap” the posts on the COAL CHUTE coal chute frame into the holes in the coal mine building. • “Snap” the pegs on the coal mine arch onto the coal chute frame. • Fit the coal chute into COAL CHUTE the coal chute frame.
Page 6
Decoration Proper label application will help keep labels looking their best! When applying labels, keep the following guidelines in mind: • Wash hands before applying labels. • Before applying labels, wipe the surface of the toy with a clean, dry cloth to remove dust or oils.
Page 9
Each GeoTrax building, sign and crossing gate ™ has a small tab that fits into matching a notch in any track piece. Place the buildings, signs and crossing gates around the track.
3-Position Remote Controller FORWARD FORWARD With Sound Effects When Used in Depot See next page for information) • Hook the cars together and place them on the track. Make sure the engine is in front. Hint: We do not recommend using the train engine on carpets.
Page 12
Fun Train Sounds! Sound effects can only be heard when remote controller is in the depot. REMOTE CONTROL 3-Position Remote Controller FORWARD DEPOT FORWARD With Sound Effects When Used in Depot Hint: For best performance, be sure to place the depot in one of the corners of your track layout.
Page 13
Many Ways to Play! Use the gantry crane to remove Load the pipes in the top of the pipe or load crates or pipes. works. Turn the wheel to load pipes onto the pipe car Drop a bolder into the coal chute Use the railroad crossing gates and load coal into the coal car.
Troubleshooting SYMPTOM SOLUTION Battery power in the engine may be weak. Replace all three batteries Engine drives slowly in the engine with fresh, alkaline batteries. The wheels on the engine or attached cars may be dirty. Wipe them with a clean cloth. Battery power in the remote controller may be weak.
Need help?
Do you have a question about the GeoTrax and is the answer not in the manual?
Questions and answers